Step 1: Will be installed Insert the disk into the computer, set it as the first startup item, and then start from it. Set language, keyboard, etc. Step 2: Click "Repair Computer" in the lower left corner. Then select "Troulfic" and "Advanced Options". Step 3: Then select "System Restore" and follow the instructions on the screen.
Download MaxDOS+WinPE. After decompressing, click [install.bat] and enter "Y" on the installation interface. The installer will detect your currently connected USB flash drive and list it.If the USB flash drive is not detected, please reinsert the USB flash drive and press "Y" to return to the main menu to start the installation again.
The operation of one-click USB flash drive startup is very simple. When the USB flash drive is connected, press the shortcut boot key continuously after booting or restarting. After entering the shortcut start menu, we use the up and down arrow keys to select the USB device and press Enter to confirm. After that, the system will automatically restart and then enter the pe system. We can start to reinstall the system.
Specific operation steps of the USB disk reinstallation system: Insert the USB disk, open the small white USB disk boot disk production tool, select "Production System", select the production USB disk in the production system, select your USB disk in the selection of the USB disk, other parameters default, and start production.
Click the "Start" menu and type in the program Open "Ghost" and start the Ghost program. The next operation steps are the same as using Ghost to install the system.
ComputerThe installation system can be installed with a USB disk. The specific installation steps are as follows. Make a USB disk boot disk, make a USB disk boot disk and a ghost version of the system image file, and store it in the made USB disk boot disk. Change the hard disk mode to ahci mode.
Download the operating system image file. You can download the mirror file of the operating system that needs to be installed from the official website or other reliable channels and save it to your computer. Insert the USB flash drive and format it. Insert the USB flash drive into the computer, then open "My Computer" or "This Computer", right-click the USB flash drive, and select "Format".
The startup is slow. The way to reinstall the system with a USB flash drive is: make a boot USB flash drive and go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make it into a system USB flash drive to saveOmit the following steps), search and download old hairy peach or cabbage and other startup USB disk making tools on the Internet, insert the USB disk into the computer and run this software to make a startup USB disk.
. Make a boot USB flash drive: Go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make it into a system USB flash drive to omit the following steps), search and download boot USB flash drive making tools such as old hairy peach or cabbage on the Internet, insert the USB flash drive into the computer to run this software to make a boot USB flash drive.
This is the step of the USB disk installation system "Cabbage USB disk boot disk first makes the USB disk into cabbage USB disk startup disk, restart the computer and wait for the boot screen to appear, press the startup shortcut key, select the USB disk boot to enter the cabbage main menu, and select "[04] Cabbage Win2003PE Classic Edition (Old machine)" option, press the Enter key to confirm.
Install the system with the USB disk. Insert the USB flash drive to turn on, press DEL or other keys to enter the BIOS, and set the setting to start from USB-F10-Y-Enter. Install the system according to the prompts. Pull out the USB flash drive. After the installation is completed, pull out the USB flash drive, and the computer will automatically restart. Click: Start the computer from the local hard disk and continue the installation. Restart the computer. After the installation is completed, restart it.
You can reinstall the computer system with a USB disk. The steps are as follows to make a USB disk boot disk with [u boot USB disk boot disk making tool] to make a u boot disk boot disk.
After entering the shortcut start menu, we use the up and down arrow keys to select the USB device and press Enter to confirm.After that, the system will automatically restart and then enter the pe system. We can start to reinstall the system.
Download a system that needs to be installed. The online is generally a CD-ROM image file ISO system file, or you can also take only GHOST.GHO system file backup and copy it to your P On the E boot disk.
Prepare an 8G or above USB flash drive, search and download the small white USB disk boot disk making tool and Windows system mirror file on Baidu. Open the small white USB disk boot disk making tool, and then switch to "USB disk startup-USB disk mode", select the USB disk that needs to be made and click "One-click to make USB disk boot disk" according to the default parameters.
The USB disk is made into a cabbage USB disk boot disk, restart the computer and wait for the boot screen to appear, press the startup shortcut key, select the USB disk to boot to enter the cabbage main menu, select the "[04] Cabbage Win2003PE Classic Edition (old machine)" option, and press the Enter key to confirm.
It may be an error in the installation of the system. It is best to install the system manually by yourself. Do not use Jinshan or 360 to reinstall the system. Next, let's talk about the steps to install the Windows 7 system in the USB flash drive. Insert the USB flash drive into the computer. Because it has been set to start from the USB flash drive, the power-on will automatically start from the USB flash drive.
1. After entering the shortcut start menu, we use the up and down arrow keys to select the USB device and press Enter to confirm.After that, the system will automatically restart and then enter the pe system. We can start to reinstall the system.
2. Set the first startup item of the computer to the USB flash drive to start. In the past, when installing the system with a CD-ROM, the boot item must be adjusted to the optical drive startup, but now we need to use the USB disk to install the system, so we need to adjust it to USB disk to start.
3. You can reinstall the computer system with a USB disk. The steps are as follows to make a USB disk boot disk with [u boot U disk boot disk making tool] to make a u boot disk boot disk.
4. ● Set the first boot item of the computer to start the USB device. In the past, to install the system with a CD-ROM, the boot item had to be adjusted to the optical drive boot, but now we need to install the system with a USB flash drive, so we need to adjust it to USB flash drive to start.
5. If in the pastWhen the installation of the system is completed, a backup is made, and the backup can be used to restore the system. If no backup is done, it is recommended to reinstall the system. It is very convenient to install the system with a USB flash drive, which is basically similar to the steps to restore the system.
6. Open the computer that needs to reinstall the system, insert the USB flash drive just made, press the F12 key continuously during the boot process, select the boot item as the USB flash drive, and it will automatically restart after saving, as shown in the figure below.
Click the "Start" menu, open "Ghost" in the program, and start the Ghost program, The next operation steps are the same as using Ghost to install the system.
The startup is slow. The way to reinstall the system with a USB flash drive is: make a boot USB flash drive and go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make a system USB flash drive to omit the following steps), search and download old hairy peach or cabbage and other startup USB flash drive production tools on the Internet, and insert the USB flash drive into the computer. This software is made into a boot USB flash drive.
The computer installation system can be installed with a USB disk. The specific installation steps are as follows: Make a USB disk boot disk, a USB disk boot disk, a ghost version system image file, and store it in the made USB disk boot disk. Change the hard disk mode to ahci mode.
You can reinstall the computer system with a USB disk. The steps are as follows to make a USB disk boot disk with [u boot USB disk boot disk making tool] to make a u boot disk boot disk.
How to reinstall the system with a USB flash drive on the computer?How to reduce customs compliance risk-APP, download it now, new users will receive a novice gift pack.
Step 1: Will be installed Insert the disk into the computer, set it as the first startup item, and then start from it. Set language, keyboard, etc. Step 2: Click "Repair Computer" in the lower left corner. Then select "Troulfic" and "Advanced Options". Step 3: Then select "System Restore" and follow the instructions on the screen.
Download MaxDOS+WinPE. After decompressing, click [install.bat] and enter "Y" on the installation interface. The installer will detect your currently connected USB flash drive and list it.If the USB flash drive is not detected, please reinsert the USB flash drive and press "Y" to return to the main menu to start the installation again.
The operation of one-click USB flash drive startup is very simple. When the USB flash drive is connected, press the shortcut boot key continuously after booting or restarting. After entering the shortcut start menu, we use the up and down arrow keys to select the USB device and press Enter to confirm. After that, the system will automatically restart and then enter the pe system. We can start to reinstall the system.
Specific operation steps of the USB disk reinstallation system: Insert the USB disk, open the small white USB disk boot disk production tool, select "Production System", select the production USB disk in the production system, select your USB disk in the selection of the USB disk, other parameters default, and start production.
Click the "Start" menu and type in the program Open "Ghost" and start the Ghost program. The next operation steps are the same as using Ghost to install the system.
ComputerThe installation system can be installed with a USB disk. The specific installation steps are as follows. Make a USB disk boot disk, make a USB disk boot disk and a ghost version of the system image file, and store it in the made USB disk boot disk. Change the hard disk mode to ahci mode.
Download the operating system image file. You can download the mirror file of the operating system that needs to be installed from the official website or other reliable channels and save it to your computer. Insert the USB flash drive and format it. Insert the USB flash drive into the computer, then open "My Computer" or "This Computer", right-click the USB flash drive, and select "Format".
The startup is slow. The way to reinstall the system with a USB flash drive is: make a boot USB flash drive and go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make it into a system USB flash drive to saveOmit the following steps), search and download old hairy peach or cabbage and other startup USB disk making tools on the Internet, insert the USB disk into the computer and run this software to make a startup USB disk.
. Make a boot USB flash drive: Go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make it into a system USB flash drive to omit the following steps), search and download boot USB flash drive making tools such as old hairy peach or cabbage on the Internet, insert the USB flash drive into the computer to run this software to make a boot USB flash drive.
This is the step of the USB disk installation system "Cabbage USB disk boot disk first makes the USB disk into cabbage USB disk startup disk, restart the computer and wait for the boot screen to appear, press the startup shortcut key, select the USB disk boot to enter the cabbage main menu, and select "[04] Cabbage Win2003PE Classic Edition (Old machine)" option, press the Enter key to confirm.
Install the system with the USB disk. Insert the USB flash drive to turn on, press DEL or other keys to enter the BIOS, and set the setting to start from USB-F10-Y-Enter. Install the system according to the prompts. Pull out the USB flash drive. After the installation is completed, pull out the USB flash drive, and the computer will automatically restart. Click: Start the computer from the local hard disk and continue the installation. Restart the computer. After the installation is completed, restart it.
You can reinstall the computer system with a USB disk. The steps are as follows to make a USB disk boot disk with [u boot USB disk boot disk making tool] to make a u boot disk boot disk.
After entering the shortcut start menu, we use the up and down arrow keys to select the USB device and press Enter to confirm.After that, the system will automatically restart and then enter the pe system. We can start to reinstall the system.
Download a system that needs to be installed. The online is generally a CD-ROM image file ISO system file, or you can also take only GHOST.GHO system file backup and copy it to your P On the E boot disk.
Prepare an 8G or above USB flash drive, search and download the small white USB disk boot disk making tool and Windows system mirror file on Baidu. Open the small white USB disk boot disk making tool, and then switch to "USB disk startup-USB disk mode", select the USB disk that needs to be made and click "One-click to make USB disk boot disk" according to the default parameters.
The USB disk is made into a cabbage USB disk boot disk, restart the computer and wait for the boot screen to appear, press the startup shortcut key, select the USB disk to boot to enter the cabbage main menu, select the "[04] Cabbage Win2003PE Classic Edition (old machine)" option, and press the Enter key to confirm.
It may be an error in the installation of the system. It is best to install the system manually by yourself. Do not use Jinshan or 360 to reinstall the system. Next, let's talk about the steps to install the Windows 7 system in the USB flash drive. Insert the USB flash drive into the computer. Because it has been set to start from the USB flash drive, the power-on will automatically start from the USB flash drive.
1. After entering the shortcut start menu, we use the up and down arrow keys to select the USB device and press Enter to confirm.After that, the system will automatically restart and then enter the pe system. We can start to reinstall the system.
2. Set the first startup item of the computer to the USB flash drive to start. In the past, when installing the system with a CD-ROM, the boot item must be adjusted to the optical drive startup, but now we need to use the USB disk to install the system, so we need to adjust it to USB disk to start.
3. You can reinstall the computer system with a USB disk. The steps are as follows to make a USB disk boot disk with [u boot U disk boot disk making tool] to make a u boot disk boot disk.
4. ● Set the first boot item of the computer to start the USB device. In the past, to install the system with a CD-ROM, the boot item had to be adjusted to the optical drive boot, but now we need to install the system with a USB flash drive, so we need to adjust it to USB flash drive to start.
5. If in the pastWhen the installation of the system is completed, a backup is made, and the backup can be used to restore the system. If no backup is done, it is recommended to reinstall the system. It is very convenient to install the system with a USB flash drive, which is basically similar to the steps to restore the system.
6. Open the computer that needs to reinstall the system, insert the USB flash drive just made, press the F12 key continuously during the boot process, select the boot item as the USB flash drive, and it will automatically restart after saving, as shown in the figure below.
Click the "Start" menu, open "Ghost" in the program, and start the Ghost program, The next operation steps are the same as using Ghost to install the system.
The startup is slow. The way to reinstall the system with a USB flash drive is: make a boot USB flash drive and go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make a system USB flash drive to omit the following steps), search and download old hairy peach or cabbage and other startup USB flash drive production tools on the Internet, and insert the USB flash drive into the computer. This software is made into a boot USB flash drive.
The computer installation system can be installed with a USB disk. The specific installation steps are as follows: Make a USB disk boot disk, a USB disk boot disk, a ghost version system image file, and store it in the made USB disk boot disk. Change the hard disk mode to ahci mode.
You can reinstall the computer system with a USB disk. The steps are as follows to make a USB disk boot disk with [u boot USB disk boot disk making tool] to make a u boot disk boot disk.
How to reinstall the system with a USB flash drive on the computer?Real-time supplier performance scoring
author: 2024-12-23 09:37Data-driven supply chain partnerships
author: 2024-12-23 09:33How to simplify HS code selection
author: 2024-12-23 09:25Industrial cleaning supplies HS code checks
author: 2024-12-23 09:53How to evaluate supplier reliability
author: 2024-12-23 09:13Global trade compliance scorecards
author: 2024-12-23 09:08Automated trade documentation routing
author: 2024-12-23 08:55454.62MB
Check423.41MB
Check145.82MB
Check484.14MB
Check438.53MB
Check315.85MB
Check132.56MB
Check385.43MB
Check598.99MB
Check426.94MB
Check324.53MB
Check333.91MB
Check729.85MB
Check347.93MB
Check525.92MB
Check945.93MB
Check537.15MB
Check112.33MB
Check656.44MB
Check939.56MB
Check626.96MB
Check786.36MB
Check281.78MB
Check439.55MB
Check238.89MB
Check246.29MB
Check431.65MB
Check855.89MB
Check693.92MB
Check855.95MB
Check782.49MB
Check824.42MB
Check333.47MB
Check472.91MB
Check437.78MB
Check163.79MB
CheckScan to install
How to reduce customs compliance risk to discover more
Netizen comments More
2697 Real-time trade data feeds
2024-12-23 11:23 recommend
988 Advanced trade route cost analysis
2024-12-23 10:55 recommend
1504 Global trade event monitoring
2024-12-23 10:36 recommend
894 Plastics (HS code ) import analysis
2024-12-23 09:28 recommend
685 How to integrate trade data into workflows
2024-12-23 08:58 recommend