1. When you see the boot screen, press the "del" key continuously to enter the BIOS setting interface. As shown in the figure below: At this time, we press the "F8" key to enter the boot menu selection window, as shown in the figure below: you can select the USB disk to start through the above steps.
2. ASUS motherboard can set up the USB disk to start 1 through the following steps. When you see the boot screen, press the "del" key continuously to enterBIOS setting interface 2 Press the "F8" key at this time to enter the boot menu selection window. As shown in the figure below, you can select the USB disk to start through the above steps.
3. Advanced BIOS Features interface, first select the hard disk boot priority: Hard Disk Boot Priority Hard Disk Bo Ot Priority) Selection: Use the plus and minus signs "+, -" on the small keyboard to select the mobile device, and select the USB flash drive at the top.
4. ASUS motherboard sets the USB flash drive to start. First, we need to turn on the computer, and then insert the USB flash drive into the computer's USB interface. When the first one appears on the computerWhen starting the information interface, we need to quickly click the del button, so that the system will help us directly enter the setting bios interface.
5. Press the [DEL] key immediately when entering the first interface. After entering, press the F8 key to enter the [Startup Menu] selection interface, and then select [USB Disk] as the priority boot item. Press the [Enter] key to confirm. After confirmation, the computer will automatically restart.
Method 1: Use the recovery partition to hold down F9 after shutting down, and then press the power key to start the computer. After entering the recovery mode, select "Restore to Factory Settings" or "Restore System". Follow the prompts and wait for the system to recover.
Enter BIOS, set Security-Secure Boot Control to Disabled, Boot-CSM Support to Enabled, (models without CSM options only support UEFI startup ) Press F10 to save, insert the system to install the USB flash drive, restart and press ESC to select the startup item.
Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
Press the F9 key to reinstall the system when the ASUS computer is turned on. The specific operation method is: press the F9 key on the keyboard when the ASUS computer enters the boot interface. After that, you will enter the following interface and select the troubleshooting option.
The following are the steps to reinstall the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for installing the system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
The operation method is as follows: click the "Start Menu" in the lower left corner of the desktop and select "Settings". Click "Update and Security" in the settings interface. Click "Restore" in the update and security interface, and then click "Start" under "Reset this computer" on the right.
1. Method 2: Use a recovery CD-ROM or USB flash drive to reinstall the system. Prepare a recovery CD-ROM or USB flash drive of an ASUS computer. Insert the CD or USB flash drive into the computer and restart the computer. Press the corresponding shortcut key (generally the "F12" or "ESC" key) during the startup process to enter the startup menu.
2. Method 1: Use the recovery partition to hold down F9 after shutting down, and then press the power button to start the computer.After entering the recovery mode, select "Restore to Factory Settings" or "Restore System". Follow the prompts and wait for the system to recover.
3. Backup important files: Before reinstalling the system, it is recommended that you back up important files and data to avoid loss. Prepare the installation media: You can choose to use CD-ROM, USB flash drive or download the system image file from the Internet as the installation media.
4. The following are the steps to reinstall the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation disc or USB drive for installing the system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
Enter BIOS, Security-Secure Boot Control is set to Disabled, Boot-CSM Support is set to Enabled, (no CSM option The model of the item only supports UEFI startup) Press F10 to save, insert the system to install the USB flash drive, restart and press ESC to select the startup item.
Method 1: Use the recovery partition to hold down F9 after shutting down, and then press the power button to start the computer. After entering the recovery mode, select "Restore to Factory Settings" or "Restore System". Follow the prompts and wait for the system to recover.
Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
The following are the steps to reinstall the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for installing the system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
1. If it is an ASUS desktop computer, insert the USB flash drive, restart and press F8, select the corresponding option in the pop-up boot menu, and press the press. If it is pre-installed wFor the model of in8/win10 system, you need to set BIOS to select USB flash drive or CD-ROM to start.
2. Press the f2 key to reinstall the laptop system. The ASUS laptop reinstall system is carried out through the bios boot disk or USB disk. Generally, press the f2 key to enter the bios setting interface, and set the boot order to the mobile device. After saving the settings and exiting, insert the boot disk and press any key to start installing the system.
3. To reinstall the system of ASUS notebook through the system CD-ROM or USB flash drive, press the ESC key, and then choose to start the installation from the DVD optical drive or USB item. 2 If your computer is pre-installed with win7 or win8 system, you can start up and press the F9 key to restore the system and pre-install the win7 system. The specific method of restoring the factory system of the machine is to see the word asus when starting up.
4. Press F12 or F2 to select the USB flash drive to start up, and reinstall the system with the USB flash drive.
5. Some users find that the startup item can't pop up when the ASUS laptop restarts and presses F. So what key should be pressed when the ASUS laptop reinstalls the system? Next, I will explain to you the startup hotkeys of ASUS computers.
1. There are two system reinstallation methods for ASUS host, one is the USB disk installation method, and the other is It is the CD-ROM installation method.
2. First of all, make sure that our ASUS desktop can be connected to the Internet, and then open the [System Home IKey reinstall] software, after entering the main page, click one-click installation - "System Reinstall", and then when the environment detection is completed, click "Next" and select the operating system on the open page.
3. Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
4. The first one is: Award 0 motherboard. When the computer is just started, it appears: press the "DEL" key or the "Delete" key and don't let go (of course, some computers also have ESC, F1, F2. F4, F11, but most computers are DELETE.
5. ASUS motherboard can set the USB flash drive to start through the following steps: When you see the boot screen, press the "del" key continuously to enter the BIOS setting interface. As shown in the figure below: At this time, we press the "F8" key to enter the boot menu selection window, as shown in the figure below: you can select the USB disk to start through the above steps.
Real-time delivery time predictions-APP, download it now, new users will receive a novice gift pack.
1. When you see the boot screen, press the "del" key continuously to enter the BIOS setting interface. As shown in the figure below: At this time, we press the "F8" key to enter the boot menu selection window, as shown in the figure below: you can select the USB disk to start through the above steps.
2. ASUS motherboard can set up the USB disk to start 1 through the following steps. When you see the boot screen, press the "del" key continuously to enterBIOS setting interface 2 Press the "F8" key at this time to enter the boot menu selection window. As shown in the figure below, you can select the USB disk to start through the above steps.
3. Advanced BIOS Features interface, first select the hard disk boot priority: Hard Disk Boot Priority Hard Disk Bo Ot Priority) Selection: Use the plus and minus signs "+, -" on the small keyboard to select the mobile device, and select the USB flash drive at the top.
4. ASUS motherboard sets the USB flash drive to start. First, we need to turn on the computer, and then insert the USB flash drive into the computer's USB interface. When the first one appears on the computerWhen starting the information interface, we need to quickly click the del button, so that the system will help us directly enter the setting bios interface.
5. Press the [DEL] key immediately when entering the first interface. After entering, press the F8 key to enter the [Startup Menu] selection interface, and then select [USB Disk] as the priority boot item. Press the [Enter] key to confirm. After confirmation, the computer will automatically restart.
Method 1: Use the recovery partition to hold down F9 after shutting down, and then press the power key to start the computer. After entering the recovery mode, select "Restore to Factory Settings" or "Restore System". Follow the prompts and wait for the system to recover.
Enter BIOS, set Security-Secure Boot Control to Disabled, Boot-CSM Support to Enabled, (models without CSM options only support UEFI startup ) Press F10 to save, insert the system to install the USB flash drive, restart and press ESC to select the startup item.
Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
Press the F9 key to reinstall the system when the ASUS computer is turned on. The specific operation method is: press the F9 key on the keyboard when the ASUS computer enters the boot interface. After that, you will enter the following interface and select the troubleshooting option.
The following are the steps to reinstall the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for installing the system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
The operation method is as follows: click the "Start Menu" in the lower left corner of the desktop and select "Settings". Click "Update and Security" in the settings interface. Click "Restore" in the update and security interface, and then click "Start" under "Reset this computer" on the right.
1. Method 2: Use a recovery CD-ROM or USB flash drive to reinstall the system. Prepare a recovery CD-ROM or USB flash drive of an ASUS computer. Insert the CD or USB flash drive into the computer and restart the computer. Press the corresponding shortcut key (generally the "F12" or "ESC" key) during the startup process to enter the startup menu.
2. Method 1: Use the recovery partition to hold down F9 after shutting down, and then press the power button to start the computer.After entering the recovery mode, select "Restore to Factory Settings" or "Restore System". Follow the prompts and wait for the system to recover.
3. Backup important files: Before reinstalling the system, it is recommended that you back up important files and data to avoid loss. Prepare the installation media: You can choose to use CD-ROM, USB flash drive or download the system image file from the Internet as the installation media.
4. The following are the steps to reinstall the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation disc or USB drive for installing the system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
Enter BIOS, Security-Secure Boot Control is set to Disabled, Boot-CSM Support is set to Enabled, (no CSM option The model of the item only supports UEFI startup) Press F10 to save, insert the system to install the USB flash drive, restart and press ESC to select the startup item.
Method 1: Use the recovery partition to hold down F9 after shutting down, and then press the power button to start the computer. After entering the recovery mode, select "Restore to Factory Settings" or "Restore System". Follow the prompts and wait for the system to recover.
Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
The following are the steps to reinstall the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for installing the system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
1. If it is an ASUS desktop computer, insert the USB flash drive, restart and press F8, select the corresponding option in the pop-up boot menu, and press the press. If it is pre-installed wFor the model of in8/win10 system, you need to set BIOS to select USB flash drive or CD-ROM to start.
2. Press the f2 key to reinstall the laptop system. The ASUS laptop reinstall system is carried out through the bios boot disk or USB disk. Generally, press the f2 key to enter the bios setting interface, and set the boot order to the mobile device. After saving the settings and exiting, insert the boot disk and press any key to start installing the system.
3. To reinstall the system of ASUS notebook through the system CD-ROM or USB flash drive, press the ESC key, and then choose to start the installation from the DVD optical drive or USB item. 2 If your computer is pre-installed with win7 or win8 system, you can start up and press the F9 key to restore the system and pre-install the win7 system. The specific method of restoring the factory system of the machine is to see the word asus when starting up.
4. Press F12 or F2 to select the USB flash drive to start up, and reinstall the system with the USB flash drive.
5. Some users find that the startup item can't pop up when the ASUS laptop restarts and presses F. So what key should be pressed when the ASUS laptop reinstalls the system? Next, I will explain to you the startup hotkeys of ASUS computers.
1. There are two system reinstallation methods for ASUS host, one is the USB disk installation method, and the other is It is the CD-ROM installation method.
2. First of all, make sure that our ASUS desktop can be connected to the Internet, and then open the [System Home IKey reinstall] software, after entering the main page, click one-click installation - "System Reinstall", and then when the environment detection is completed, click "Next" and select the operating system on the open page.
3. Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
4. The first one is: Award 0 motherboard. When the computer is just started, it appears: press the "DEL" key or the "Delete" key and don't let go (of course, some computers also have ESC, F1, F2. F4, F11, but most computers are DELETE.
5. ASUS motherboard can set the USB flash drive to start through the following steps: When you see the boot screen, press the "del" key continuously to enter the BIOS setting interface. As shown in the figure below: At this time, we press the "F8" key to enter the boot menu selection window, as shown in the figure below: you can select the USB disk to start through the above steps.
HS code-based negotiation with customs
author: 2024-12-23 06:30How to align trade data with marketing
author: 2024-12-23 06:15How to comply with export licensing
author: 2024-12-23 05:57Export packaging standards by HS code
author: 2024-12-23 05:53How to leverage customs rulings data
author: 2024-12-23 05:44Integrating HS codes in export marketing
author: 2024-12-23 07:35Predictive trade data cleaning
author: 2024-12-23 07:35Enhanced shipment documentation verification
author: 2024-12-23 06:58Trade data for renewable energy sector
author: 2024-12-23 06:25HS code-based tariff calculations
author: 2024-12-23 06:06659.11MB
Check172.38MB
Check389.82MB
Check379.84MB
Check745.97MB
Check614.76MB
Check876.92MB
Check458.97MB
Check227.91MB
Check171.27MB
Check856.92MB
Check782.59MB
Check983.73MB
Check232.15MB
Check365.25MB
Check741.64MB
Check983.27MB
Check354.89MB
Check913.17MB
Check894.37MB
Check943.98MB
Check647.57MB
Check881.34MB
Check549.86MB
Check999.58MB
Check431.41MB
Check675.45MB
Check468.87MB
Check231.44MB
Check189.63MB
Check462.23MB
Check153.38MB
Check942.49MB
Check311.96MB
Check616.69MB
Check179.83MB
CheckScan to install
Real-time delivery time predictions to discover more
Netizen comments More
2268 Global trade corridor analysis
2024-12-23 07:33 recommend
145 Industrial chemicals HS code monitoring
2024-12-23 07:13 recommend
2426 Pharma finished goods HS code references
2024-12-23 06:37 recommend
2503 HS code-based customs dispute resolution
2024-12-23 06:18 recommend
1177 Customized HS code dashboards
2024-12-23 05:40 recommend