1. When you see the boot screen, press the "del" key continuously to enter the BIOS setting interface. As shown in the figure below: At this time, we press the "F8" key to enter the boot menu selection window, as shown in the figure below: you can select the USB disk to start through the above steps.
2. ASUS motherboard can set up the USB disk to start 1 through the following steps. When you see the boot screen, press the "del" key continuously to enterBIOS setting interface 2 Press the "F8" key at this time to enter the boot menu selection window. As shown in the figure below, you can select the USB disk to start through the above steps.
3. Advanced BIOS Features interface, first select the hard disk boot priority: Hard Disk Boot Priority Hard Disk Bo Ot Priority) Selection: Use the plus and minus signs "+, -" on the small keyboard to select the mobile device, and select the USB flash drive at the top.
4. ASUS motherboard sets the USB flash drive to start. First, we need to turn on the computer, and then insert the USB flash drive into the computer's USB interface. When the first one appears on the computerWhen starting the information interface, we need to quickly click the del button, so that the system will help us directly enter the setting bios interface.
5. Press the [DEL] key immediately when entering the first interface. After entering, press the F8 key to enter the [Startup Menu] selection interface, and then select [USB Disk] as the priority boot item. Press the [Enter] key to confirm. After confirmation, the computer will automatically restart.
Method 1: Use the recovery partition to hold down F9 after shutting down, and then press the power key to start the computer. After entering the recovery mode, select "Restore to Factory Settings" or "Restore System". Follow the prompts and wait for the system to recover.
Enter BIOS, set Security-Secure Boot Control to Disabled, Boot-CSM Support to Enabled, (models without CSM options only support UEFI startup ) Press F10 to save, insert the system to install the USB flash drive, restart and press ESC to select the startup item.
Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
Press the F9 key to reinstall the system when the ASUS computer is turned on. The specific operation method is: press the F9 key on the keyboard when the ASUS computer enters the boot interface. After that, you will enter the following interface and select the troubleshooting option.
The following are the steps to reinstall the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for installing the system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
The operation method is as follows: click the "Start Menu" in the lower left corner of the desktop and select "Settings". Click "Update and Security" in the settings interface. Click "Restore" in the update and security interface, and then click "Start" under "Reset this computer" on the right.
1. Method 2: Use a recovery CD-ROM or USB flash drive to reinstall the system. Prepare a recovery CD-ROM or USB flash drive of an ASUS computer. Insert the CD or USB flash drive into the computer and restart the computer. Press the corresponding shortcut key (generally the "F12" or "ESC" key) during the startup process to enter the startup menu.
2. Method 1: Use the recovery partition to hold down F9 after shutting down, and then press the power button to start the computer.After entering the recovery mode, select "Restore to Factory Settings" or "Restore System". Follow the prompts and wait for the system to recover.
3. Backup important files: Before reinstalling the system, it is recommended that you back up important files and data to avoid loss. Prepare the installation media: You can choose to use CD-ROM, USB flash drive or download the system image file from the Internet as the installation media.
4. The following are the steps to reinstall the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation disc or USB drive for installing the system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
Enter BIOS, Security-Secure Boot Control is set to Disabled, Boot-CSM Support is set to Enabled, (no CSM option The model of the item only supports UEFI startup) Press F10 to save, insert the system to install the USB flash drive, restart and press ESC to select the startup item.
Method 1: Use the recovery partition to hold down F9 after shutting down, and then press the power button to start the computer. After entering the recovery mode, select "Restore to Factory Settings" or "Restore System". Follow the prompts and wait for the system to recover.
Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
The following are the steps to reinstall the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for installing the system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
1. If it is an ASUS desktop computer, insert the USB flash drive, restart and press F8, select the corresponding option in the pop-up boot menu, and press the press. If it is pre-installed wFor the model of in8/win10 system, you need to set BIOS to select USB flash drive or CD-ROM to start.
2. Press the f2 key to reinstall the laptop system. The ASUS laptop reinstall system is carried out through the bios boot disk or USB disk. Generally, press the f2 key to enter the bios setting interface, and set the boot order to the mobile device. After saving the settings and exiting, insert the boot disk and press any key to start installing the system.
3. To reinstall the system of ASUS notebook through the system CD-ROM or USB flash drive, press the ESC key, and then choose to start the installation from the DVD optical drive or USB item. 2 If your computer is pre-installed with win7 or win8 system, you can start up and press the F9 key to restore the system and pre-install the win7 system. The specific method of restoring the factory system of the machine is to see the word asus when starting up.
4. Press F12 or F2 to select the USB flash drive to start up, and reinstall the system with the USB flash drive.
5. Some users find that the startup item can't pop up when the ASUS laptop restarts and presses F. So what key should be pressed when the ASUS laptop reinstalls the system? Next, I will explain to you the startup hotkeys of ASUS computers.
1. There are two system reinstallation methods for ASUS host, one is the USB disk installation method, and the other is It is the CD-ROM installation method.
2. First of all, make sure that our ASUS desktop can be connected to the Internet, and then open the [System Home IKey reinstall] software, after entering the main page, click one-click installation - "System Reinstall", and then when the environment detection is completed, click "Next" and select the operating system on the open page.
3. Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
4. The first one is: Award 0 motherboard. When the computer is just started, it appears: press the "DEL" key or the "Delete" key and don't let go (of course, some computers also have ESC, F1, F2. F4, F11, but most computers are DELETE.
5. ASUS motherboard can set the USB flash drive to start through the following steps: When you see the boot screen, press the "del" key continuously to enter the BIOS setting interface. As shown in the figure below: At this time, we press the "F8" key to enter the boot menu selection window, as shown in the figure below: you can select the USB disk to start through the above steps.
*GCC countries HS code tariffs-APP, download it now, new users will receive a novice gift pack.
1. When you see the boot screen, press the "del" key continuously to enter the BIOS setting interface. As shown in the figure below: At this time, we press the "F8" key to enter the boot menu selection window, as shown in the figure below: you can select the USB disk to start through the above steps.
2. ASUS motherboard can set up the USB disk to start 1 through the following steps. When you see the boot screen, press the "del" key continuously to enterBIOS setting interface 2 Press the "F8" key at this time to enter the boot menu selection window. As shown in the figure below, you can select the USB disk to start through the above steps.
3. Advanced BIOS Features interface, first select the hard disk boot priority: Hard Disk Boot Priority Hard Disk Bo Ot Priority) Selection: Use the plus and minus signs "+, -" on the small keyboard to select the mobile device, and select the USB flash drive at the top.
4. ASUS motherboard sets the USB flash drive to start. First, we need to turn on the computer, and then insert the USB flash drive into the computer's USB interface. When the first one appears on the computerWhen starting the information interface, we need to quickly click the del button, so that the system will help us directly enter the setting bios interface.
5. Press the [DEL] key immediately when entering the first interface. After entering, press the F8 key to enter the [Startup Menu] selection interface, and then select [USB Disk] as the priority boot item. Press the [Enter] key to confirm. After confirmation, the computer will automatically restart.
Method 1: Use the recovery partition to hold down F9 after shutting down, and then press the power key to start the computer. After entering the recovery mode, select "Restore to Factory Settings" or "Restore System". Follow the prompts and wait for the system to recover.
Enter BIOS, set Security-Secure Boot Control to Disabled, Boot-CSM Support to Enabled, (models without CSM options only support UEFI startup ) Press F10 to save, insert the system to install the USB flash drive, restart and press ESC to select the startup item.
Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
Press the F9 key to reinstall the system when the ASUS computer is turned on. The specific operation method is: press the F9 key on the keyboard when the ASUS computer enters the boot interface. After that, you will enter the following interface and select the troubleshooting option.
The following are the steps to reinstall the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for installing the system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
The operation method is as follows: click the "Start Menu" in the lower left corner of the desktop and select "Settings". Click "Update and Security" in the settings interface. Click "Restore" in the update and security interface, and then click "Start" under "Reset this computer" on the right.
1. Method 2: Use a recovery CD-ROM or USB flash drive to reinstall the system. Prepare a recovery CD-ROM or USB flash drive of an ASUS computer. Insert the CD or USB flash drive into the computer and restart the computer. Press the corresponding shortcut key (generally the "F12" or "ESC" key) during the startup process to enter the startup menu.
2. Method 1: Use the recovery partition to hold down F9 after shutting down, and then press the power button to start the computer.After entering the recovery mode, select "Restore to Factory Settings" or "Restore System". Follow the prompts and wait for the system to recover.
3. Backup important files: Before reinstalling the system, it is recommended that you back up important files and data to avoid loss. Prepare the installation media: You can choose to use CD-ROM, USB flash drive or download the system image file from the Internet as the installation media.
4. The following are the steps to reinstall the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation disc or USB drive for installing the system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
Enter BIOS, Security-Secure Boot Control is set to Disabled, Boot-CSM Support is set to Enabled, (no CSM option The model of the item only supports UEFI startup) Press F10 to save, insert the system to install the USB flash drive, restart and press ESC to select the startup item.
Method 1: Use the recovery partition to hold down F9 after shutting down, and then press the power button to start the computer. After entering the recovery mode, select "Restore to Factory Settings" or "Restore System". Follow the prompts and wait for the system to recover.
Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
The following are the steps to reinstall the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for installing the system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
1. If it is an ASUS desktop computer, insert the USB flash drive, restart and press F8, select the corresponding option in the pop-up boot menu, and press the press. If it is pre-installed wFor the model of in8/win10 system, you need to set BIOS to select USB flash drive or CD-ROM to start.
2. Press the f2 key to reinstall the laptop system. The ASUS laptop reinstall system is carried out through the bios boot disk or USB disk. Generally, press the f2 key to enter the bios setting interface, and set the boot order to the mobile device. After saving the settings and exiting, insert the boot disk and press any key to start installing the system.
3. To reinstall the system of ASUS notebook through the system CD-ROM or USB flash drive, press the ESC key, and then choose to start the installation from the DVD optical drive or USB item. 2 If your computer is pre-installed with win7 or win8 system, you can start up and press the F9 key to restore the system and pre-install the win7 system. The specific method of restoring the factory system of the machine is to see the word asus when starting up.
4. Press F12 or F2 to select the USB flash drive to start up, and reinstall the system with the USB flash drive.
5. Some users find that the startup item can't pop up when the ASUS laptop restarts and presses F. So what key should be pressed when the ASUS laptop reinstalls the system? Next, I will explain to you the startup hotkeys of ASUS computers.
1. There are two system reinstallation methods for ASUS host, one is the USB disk installation method, and the other is It is the CD-ROM installation method.
2. First of all, make sure that our ASUS desktop can be connected to the Internet, and then open the [System Home IKey reinstall] software, after entering the main page, click one-click installation - "System Reinstall", and then when the environment detection is completed, click "Next" and select the operating system on the open page.
3. Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
4. The first one is: Award 0 motherboard. When the computer is just started, it appears: press the "DEL" key or the "Delete" key and don't let go (of course, some computers also have ESC, F1, F2. F4, F11, but most computers are DELETE.
5. ASUS motherboard can set the USB flash drive to start through the following steps: When you see the boot screen, press the "del" key continuously to enter the BIOS setting interface. As shown in the figure below: At this time, we press the "F8" key to enter the boot menu selection window, as shown in the figure below: you can select the USB disk to start through the above steps.
*Apparel HS code mapping for global exports
author: 2024-12-23 11:58Dynamic commodity risk indexing
author: 2024-12-23 11:36Furniture imports HS code analysis
author: 2024-12-23 10:56Trade data for healthcare supplies
author: 2024-12-23 09:59HS code-based commodity chain analysis
author: 2024-12-23 11:32Trade data for strategic pricing
author: 2024-12-23 11:20Electronics supply chain intelligence
author: 2024-12-23 10:49HS code-based re-exports in free zones
author: 2024-12-23 10:15Ceramic tiles HS code classification
author: 2024-12-23 09:56381.97MB
Check471.65MB
Check855.76MB
Check177.26MB
Check267.13MB
Check476.47MB
Check725.11MB
Check374.19MB
Check172.62MB
Check919.77MB
Check271.73MB
Check968.24MB
Check361.74MB
Check329.94MB
Check856.51MB
Check451.41MB
Check387.47MB
Check344.38MB
Check563.12MB
Check922.67MB
Check473.94MB
Check267.28MB
Check723.62MB
Check411.11MB
Check371.21MB
Check656.84MB
Check987.72MB
Check592.89MB
Check157.56MB
Check814.15MB
Check882.75MB
Check657.26MB
Check744.67MB
Check735.13MB
Check941.22MB
Check971.17MB
CheckScan to install
GCC countries HS code tariffs to discover more
Netizen comments More
279 Global HS code standardization efforts
2024-12-23 11:46 recommend
208 Global trade flow optimization
2024-12-23 11:40 recommend
1245 India HS code-based product analysis
2024-12-23 11:22 recommend
2849 Cotton (HS code ) trade insights
2024-12-23 11:13 recommend
2297 How to monitor competitor supply chains
2024-12-23 09:38 recommend