1. Loop program. The G71 outer circular rough car cycle instruction is applicable to the outer cylindrical surface or inner hole surface with a long axial size, which requires multiple cuts to complete roughing. However, the application of this instruction has its limitations, that is, the contour of the part must conform to the direction of the X axis and the Z axis at the same time monotonously increasing or monotonously decreasing.
2. FANUC specifies 2 digits/4 digits after address T, and the code signal and selected communication number are sent to the machine tool to select the tool on the machine tool. A program segment can only specify one T code. For the number of digits that can be instructed after the T address and the correspondence between the T code and the machine tool operation, please refer to the manual of the machine tool manufacturer.
3. CNC Computerized Numerical Control Machine (cnc) is an automated machine tool equipped with a program control system. The control system can logically process programs with control codes or other symbolic instructions and decode them, so that the machine tool can operate and process parts. It is also called CNC or CNC machine tool.
4. The code of CNC programming is as follows: G code is the instruction in the CNC program. It is generally called the G instruction. Using G code, you can realize fast positioning, inverse circle interpolation, forward circle interpolation, midpoint arc interpolation, radius programming, and jump processing.
5. Instruct the numerical control system to change the tool, and use the address T and the following 4 digits to specify the tool number and tool compensation number (tool bias number). The first two digits are the tool serial number: 0~99, and the last two digits are the tool compensation number: 0~32. After each tool processing, the tool compensation must be canceled.
1. Run the program: start the CNC machine tool, automatically control and adjust the machine tool through the controller, and complete the processing process. In this process, real-time monitoring and adjustment of the machine tool is required to ensure the processing accuracy and stability. Inspect the finished product: After the processing is completed, inspect and test the finished product to ensure that its quality meets the requirements.
2. Return to zero. Before the knife, you must return to zero (return to the origin of the machine tool) in order to clear the coordinate data of the last operation.Note: All three axes of X, Y and Z need to return to zero. The spindle rotates forward. Using the "MDI" mode, the spindle rotates forward by entering the instruction code and maintains a medium rotation speed.
3. Use CAD/CAM software to realize automatic programming of modeling and images. The most typical software is Master CAM, which can complete the programming of milling two-coordinate, three-coordinate, four-coordinate and five-coordinate, turning and wire cutting. Although this kind of software has a single function, it is simple and easy to learn, and the price is low. It is still the choice of small and medium-sized enterprises at present.
1. Linux is usually the most commonly used operating system in network security. This is because Linux is not easily attacked by viruses, and its system is very well maintained, so there is very little chance of vulnerabilities in the system.
2. Operating system: Most programming software is developed on operating systems such as Windows, macOS or Linux. Choosing a suitable operating system can ensure the normal operation and ease of operation of the programming software. Monitor: The higher the resolution, the clearer the display effect.
3. Operating system: usually commonly used operating systems such as Windows or Mac OS X. Monitor: Dual monitors are better than single monitors. Developers usually need to use multiple tools and applications at the same time for development work.
4. Yes, but it is recommended to use a Windows tablet. If you want to learn programming, you can't use a tablet computer. At least you have to use a laptop orIt's a desktop, because you have to install some programming software, and then some programming code writing, you have to use the keyboard to operate.
5. **Operating system**: Most programmers use Windows, macOS or Linux operating systems. Choosing an operating system that you are familiar with and suitable for programming can improve work efficiency. **Portability**: If you need to go out to work or attend meetings frequently, it will be more convenient to choose a lightweight laptop.
*Latin American HS code alignment-APP, download it now, new users will receive a novice gift pack.
1. Loop program. The G71 outer circular rough car cycle instruction is applicable to the outer cylindrical surface or inner hole surface with a long axial size, which requires multiple cuts to complete roughing. However, the application of this instruction has its limitations, that is, the contour of the part must conform to the direction of the X axis and the Z axis at the same time monotonously increasing or monotonously decreasing.
2. FANUC specifies 2 digits/4 digits after address T, and the code signal and selected communication number are sent to the machine tool to select the tool on the machine tool. A program segment can only specify one T code. For the number of digits that can be instructed after the T address and the correspondence between the T code and the machine tool operation, please refer to the manual of the machine tool manufacturer.
3. CNC Computerized Numerical Control Machine (cnc) is an automated machine tool equipped with a program control system. The control system can logically process programs with control codes or other symbolic instructions and decode them, so that the machine tool can operate and process parts. It is also called CNC or CNC machine tool.
4. The code of CNC programming is as follows: G code is the instruction in the CNC program. It is generally called the G instruction. Using G code, you can realize fast positioning, inverse circle interpolation, forward circle interpolation, midpoint arc interpolation, radius programming, and jump processing.
5. Instruct the numerical control system to change the tool, and use the address T and the following 4 digits to specify the tool number and tool compensation number (tool bias number). The first two digits are the tool serial number: 0~99, and the last two digits are the tool compensation number: 0~32. After each tool processing, the tool compensation must be canceled.
1. Run the program: start the CNC machine tool, automatically control and adjust the machine tool through the controller, and complete the processing process. In this process, real-time monitoring and adjustment of the machine tool is required to ensure the processing accuracy and stability. Inspect the finished product: After the processing is completed, inspect and test the finished product to ensure that its quality meets the requirements.
2. Return to zero. Before the knife, you must return to zero (return to the origin of the machine tool) in order to clear the coordinate data of the last operation.Note: All three axes of X, Y and Z need to return to zero. The spindle rotates forward. Using the "MDI" mode, the spindle rotates forward by entering the instruction code and maintains a medium rotation speed.
3. Use CAD/CAM software to realize automatic programming of modeling and images. The most typical software is Master CAM, which can complete the programming of milling two-coordinate, three-coordinate, four-coordinate and five-coordinate, turning and wire cutting. Although this kind of software has a single function, it is simple and easy to learn, and the price is low. It is still the choice of small and medium-sized enterprises at present.
1. Linux is usually the most commonly used operating system in network security. This is because Linux is not easily attacked by viruses, and its system is very well maintained, so there is very little chance of vulnerabilities in the system.
2. Operating system: Most programming software is developed on operating systems such as Windows, macOS or Linux. Choosing a suitable operating system can ensure the normal operation and ease of operation of the programming software. Monitor: The higher the resolution, the clearer the display effect.
3. Operating system: usually commonly used operating systems such as Windows or Mac OS X. Monitor: Dual monitors are better than single monitors. Developers usually need to use multiple tools and applications at the same time for development work.
4. Yes, but it is recommended to use a Windows tablet. If you want to learn programming, you can't use a tablet computer. At least you have to use a laptop orIt's a desktop, because you have to install some programming software, and then some programming code writing, you have to use the keyboard to operate.
5. **Operating system**: Most programmers use Windows, macOS or Linux operating systems. Choosing an operating system that you are familiar with and suitable for programming can improve work efficiency. **Portability**: If you need to go out to work or attend meetings frequently, it will be more convenient to choose a lightweight laptop.
*HS code-driven risk management frameworks
author: 2024-12-23 07:45How to handle multi-currency billing
author: 2024-12-23 06:25End-to-end shipment management
author: 2024-12-23 06:19Global trade disruption analysis
author: 2024-12-23 06:03Inland freight HS code applicability
author: 2024-12-23 05:57Holistic international trade reports
author: 2024-12-23 07:25Processed nuts HS code references
author: 2024-12-23 06:25HS code tagging in tariff databases
author: 2024-12-23 06:21Dynamic customs duty calculation
author: 2024-12-23 05:52How to simplify export documentation
author: 2024-12-23 05:43528.19MB
Check771.37MB
Check973.74MB
Check278.76MB
Check916.78MB
Check433.64MB
Check517.54MB
Check386.41MB
Check983.82MB
Check331.33MB
Check513.12MB
Check361.96MB
Check651.63MB
Check669.89MB
Check798.11MB
Check744.75MB
Check763.18MB
Check247.89MB
Check759.53MB
Check226.95MB
Check488.82MB
Check777.48MB
Check253.86MB
Check471.72MB
Check347.61MB
Check818.51MB
Check841.18MB
Check578.26MB
Check781.38MB
Check996.31MB
Check381.84MB
Check311.69MB
Check331.83MB
Check118.48MB
Check573.49MB
Check455.16MB
CheckScan to install
Latin American HS code alignment to discover more
Netizen comments More
2501 How to track non-compliance incidents
2024-12-23 07:25 recommend
1394 Optimizing FTAs with HS code data
2024-12-23 07:12 recommend
2946 Medical diagnostics HS code classification
2024-12-23 06:56 recommend
2068 How to track global shipments
2024-12-23 06:44 recommend
1093 HS code intelligence in freight auditing
2024-12-23 06:24 recommend