1. Another reason is that the throttle valve has failed. The above two problems will cause engine shaking and unstable speed.
2. If the oil is not replaced on schedule/the viscosity of the oil is too high. As we all know, the engine is not allowed to have excessive oil viscosity under cold start or low temperature operation; and the engine is not allowed to be too low when the engine is fully warmed to the normal operating temperature.
3. Unstable idle speed is manifested as: when idling, the engine trembles and the speed is uneven. The causes are: blockage of the idle air measuring hole, poor operation of the idle device, weak sparks of individual cylinder spark plugs, loose sealing of individual valves, leakage of air intake manifolds, too early or too late ignition time, improper idling adjustment, etc.
4. Reason 2: The battery loses power. The battery has a certain service life. If the battery has been used for a long time, the initial starting voltage will be low, causing the body to shake. Tips: Clean the battery frequently and replenish the electrolyte. Reason 3: Low fuel quality. In irregular gas stations, the fuel quality is not guaranteed, resulting in insufficient power.
1. The quality of the Foton Monpark 486 engine is very good. Foton Monpark's 486 engine is a medium and low-speed high-power engine, which adopts international leading technology and supporting equipment, with the characteristics of high reliability, strong durability and good fuel economy.
2. The Monpaque models have three engines, the 0l and 4l Monpaque models are gasoline engines, and the Monpaque models equipped with 25T turbocharged diesel engines.
3. The Foton Monpark engine is a domestic Mitsubishi engine. The Foton Monpark engine uses the domestic Mitsubishi 4g63 0-displacement engine and the 4g69s4m 4-displacement engine respectively.
4. The parameter configuration is as follows: Foton Monpark is a light passenger-level model, using gasoline as the energy type, which meets the environmental protection standards of national IV/national V.Equipped with a 0L naturally aspirated engine, the maximum power is 90kW and the maximum torque is 165N·m.
5. Hello! The Foton Monpark Diesel Version Is Equipped With A Cummins ISF8 Engine, With Strong Power, A Power Of Up To 96kW, A Torque Of 280Nm, Low Fuel Consumption And Low Noise, 20,000 Kilometers Of Maintenance, 500,000 Kilometers Without Major Repair.
6. The 8-liter engine of Monpaques is a turbocharged diesel engine. The maximum power of this engine is 96kw and the maximum torque is 280 Nm. The maximum power speed of this engine is 3600 rpm, and the maximum torque speed is 1400 to 3000 rpm. Clock. This engine is equipped with in-cylinder direct injection technology.
Monpaque is of good quality. Make sure that the tire pressure is correct. Change to fuel-efficient tires. Don't change the size of the tire at will. Regularly check whether your driving disc and tires are right. Use the smoothing oil with the lowest viscosity. Maintain the engine well and fix it immediately if there is a problem. Take good care of the car body. Don't believe the saying that the higher the octane number of gasoline, the better.
I fell in love with this car at a glance at that time. I valued the appearance and space of the car. This car is not only in appearance, but also more suitable for my daily use of carrying goods and people in all aspects. It is cost-effective, and the space is large. It is not a problem to load general goods. The chassis is stable and the controllability is very good.
Foton Monpark engine must be familiar to everyone with Cummins. It has strong power and stable operation, long service life and fuel-saving! The noise and vibration of this car are also very small, and it is very smooth to drive. As we all know, Foton and Mercedes-Benz have a joint venture commercial vehicle project. The technology used is based on Mercedes-Benz, and the quality is also very reliable.
This car was launched relatively late, and the market holdings were not very high, but we have a lot of Kaimeng Pike. The VVT engine is technically mature and quite fuel-efficient.Repair and maintenance are not expensive. If you want to load a lot, it is recommended to use 4. Mine is 4. Usually, it is easy to run with two tons.
Mine is Monpaque E. At that time, I bought this car because I liked the fashionable appearance of the car, and I felt that the Monpaque was relatively large in the seven-seater car. After testing the 0L engine, it was also quite powerful, so I bought it directly. Now I have been driving it for more than half a year, and I feel that this car is particularly adaptable.
Compared with Monpaque E, I personally think Lingzhi is relatively better, because Lingzhi has a relatively large holding capacity and has a relative advantage in terms of car maintenance convenience.
HS code correlation with duty rates-APP, download it now, new users will receive a novice gift pack.
1. Another reason is that the throttle valve has failed. The above two problems will cause engine shaking and unstable speed.
2. If the oil is not replaced on schedule/the viscosity of the oil is too high. As we all know, the engine is not allowed to have excessive oil viscosity under cold start or low temperature operation; and the engine is not allowed to be too low when the engine is fully warmed to the normal operating temperature.
3. Unstable idle speed is manifested as: when idling, the engine trembles and the speed is uneven. The causes are: blockage of the idle air measuring hole, poor operation of the idle device, weak sparks of individual cylinder spark plugs, loose sealing of individual valves, leakage of air intake manifolds, too early or too late ignition time, improper idling adjustment, etc.
4. Reason 2: The battery loses power. The battery has a certain service life. If the battery has been used for a long time, the initial starting voltage will be low, causing the body to shake. Tips: Clean the battery frequently and replenish the electrolyte. Reason 3: Low fuel quality. In irregular gas stations, the fuel quality is not guaranteed, resulting in insufficient power.
1. The quality of the Foton Monpark 486 engine is very good. Foton Monpark's 486 engine is a medium and low-speed high-power engine, which adopts international leading technology and supporting equipment, with the characteristics of high reliability, strong durability and good fuel economy.
2. The Monpaque models have three engines, the 0l and 4l Monpaque models are gasoline engines, and the Monpaque models equipped with 25T turbocharged diesel engines.
3. The Foton Monpark engine is a domestic Mitsubishi engine. The Foton Monpark engine uses the domestic Mitsubishi 4g63 0-displacement engine and the 4g69s4m 4-displacement engine respectively.
4. The parameter configuration is as follows: Foton Monpark is a light passenger-level model, using gasoline as the energy type, which meets the environmental protection standards of national IV/national V.Equipped with a 0L naturally aspirated engine, the maximum power is 90kW and the maximum torque is 165N·m.
5. Hello! The Foton Monpark Diesel Version Is Equipped With A Cummins ISF8 Engine, With Strong Power, A Power Of Up To 96kW, A Torque Of 280Nm, Low Fuel Consumption And Low Noise, 20,000 Kilometers Of Maintenance, 500,000 Kilometers Without Major Repair.
6. The 8-liter engine of Monpaques is a turbocharged diesel engine. The maximum power of this engine is 96kw and the maximum torque is 280 Nm. The maximum power speed of this engine is 3600 rpm, and the maximum torque speed is 1400 to 3000 rpm. Clock. This engine is equipped with in-cylinder direct injection technology.
Monpaque is of good quality. Make sure that the tire pressure is correct. Change to fuel-efficient tires. Don't change the size of the tire at will. Regularly check whether your driving disc and tires are right. Use the smoothing oil with the lowest viscosity. Maintain the engine well and fix it immediately if there is a problem. Take good care of the car body. Don't believe the saying that the higher the octane number of gasoline, the better.
I fell in love with this car at a glance at that time. I valued the appearance and space of the car. This car is not only in appearance, but also more suitable for my daily use of carrying goods and people in all aspects. It is cost-effective, and the space is large. It is not a problem to load general goods. The chassis is stable and the controllability is very good.
Foton Monpark engine must be familiar to everyone with Cummins. It has strong power and stable operation, long service life and fuel-saving! The noise and vibration of this car are also very small, and it is very smooth to drive. As we all know, Foton and Mercedes-Benz have a joint venture commercial vehicle project. The technology used is based on Mercedes-Benz, and the quality is also very reliable.
This car was launched relatively late, and the market holdings were not very high, but we have a lot of Kaimeng Pike. The VVT engine is technically mature and quite fuel-efficient.Repair and maintenance are not expensive. If you want to load a lot, it is recommended to use 4. Mine is 4. Usually, it is easy to run with two tons.
Mine is Monpaque E. At that time, I bought this car because I liked the fashionable appearance of the car, and I felt that the Monpaque was relatively large in the seven-seater car. After testing the 0L engine, it was also quite powerful, so I bought it directly. Now I have been driving it for more than half a year, and I feel that this car is particularly adaptable.
Compared with Monpaque E, I personally think Lingzhi is relatively better, because Lingzhi has a relatively large holding capacity and has a relative advantage in terms of car maintenance convenience.
Global trade certification services
author: 2024-12-23 11:03How to forecast seasonal import demands
author: 2024-12-23 10:47Engine parts HS code verification
author: 2024-12-23 10:21Dairy imports HS code references
author: 2024-12-23 09:59Niche pharmaceuticals HS code verification
author: 2024-12-23 12:04HS code-based trade data analytics
author: 2024-12-23 12:03Data-driven customs paperwork reduction
author: 2024-12-23 10:40Identifying growth markets via HS code data
author: 2024-12-23 09:36HS code-based textile tariff scheduling
author: 2024-12-23 09:22586.94MB
Check939.64MB
Check979.95MB
Check956.98MB
Check855.61MB
Check678.41MB
Check212.69MB
Check111.93MB
Check867.27MB
Check389.58MB
Check163.54MB
Check642.32MB
Check277.69MB
Check933.53MB
Check598.65MB
Check227.49MB
Check591.78MB
Check352.75MB
Check786.53MB
Check482.96MB
Check185.39MB
Check551.92MB
Check953.43MB
Check541.15MB
Check393.54MB
Check441.89MB
Check754.53MB
Check324.53MB
Check472.45MB
Check871.64MB
Check859.64MB
Check396.68MB
Check124.18MB
Check616.14MB
Check877.32MB
Check288.74MB
CheckScan to install
HS code correlation with duty rates to discover more
Netizen comments More
1612 Import export compliance audits
2024-12-23 11:55 recommend
2564 Mining equipment HS code references
2024-12-23 11:54 recommend
1687 Real-time freight schedule optimization
2024-12-23 11:50 recommend
1287 Lithium batteries HS code classification
2024-12-23 11:25 recommend
955 HS code-based container stowage planning
2024-12-23 09:24 recommend