Supplier risk profiling with trade data

List of contents of this article:

• 1. SSD partition and installation system method
• 2, How to install the system on the solid-state drive?
• 3, Solid-state How to install the system on the hard disk
• 4, Install Window under solid-state driveThe method of s7 system
• 5, SSD installation system and partition
• 6, Solid State Drive Installation System Detailed Tutorial

Solid-state drive partition and installation system method

1. Solid-state drive as system and partition is exactly the same as mechanical hard disk. It's better to install it directly with the original Microsoft CD. But the difference from the mechanical hard disk is that to turn on the AHCI mode, you must turn on the AHCI mode in the bios. Generally, new computers, such as those purchased within 2 years, basically don't have to worry about it, because there is only AHCI mode.

2. Sure". Then establish an extended partition for the remaining space first and then establish a logical partition. The method is the same as establishing a system partition. Then click "Save Changes" in the upper left corner of the software to format the partition of the solid-state drive. It can be used after that. Remember to install the system in the main disk partition.

3. Prepare the installation media: First of all, you need to prepare an installation media containing the operating system, which can be a Windows installation CD or a USB installation disk. Connect the solid-state drive: Connect the solid-state drive to the motherboard of the computer. You can use the SATA cable to connect, or use the M.2 interface to plug it directly into the motherboard.

4. Generally, it is easy to convert the partition type of the solid-state drive to GUID format, that is, GPT partition, with the help of partition tools such as disk sprite. The solid-state drive is a GPT partition, and the installation system also needs to be installed in UEFI mode.

How to install the system on the solid-state drive?

First of all, format the newly purchased solid-state drive in the computer system. It is best not to format it quickly, but to format it slowly.2. After formatting, install the system with the one-click restore tool. If there is no accident in the middle, you can be sure that there is no problem with the system installation.

Preparation: - Hardware: Purchase a solid-state drive suitable for your model. - Software: Prepare an operating system installation media that can be installed, such as Windows 10 installation CD or USB drive. Backup data: It is recommended that you back up important data before any operation.

Preparation: - Make sure you have a bootable system installation media, such as a Windows installation disc or USB installation disk. - Make sure your computer is turned off and connect the solid-state drive correctly to the SATA interface on the motherboard.

The transmission speed of solid-state drives is much faster than that of ordinary hard disks, and it is generally used as a system disk to install the system.

If the SSD capacity is large enough, it is recommended to divide it into two disks, one only installs the system and the other installs common applications. In this way, it will be smoother and more comfortable to use, and the system disk is at least 60GB or more).

The installation method is the interface of the 5-inch SATA solid-state drive is the same as the interface of the mechanical disk. Put the solid-state disk on the hard disk rack (if it is not easy to install, buy a solid-state drive bracket), connect the data cable and power cable, and the solid-state drive can be used. Set up the master-sceept disk.

How to install the system on the solid-state drive

1. After making the wepe boot disk, copy the iso image of the win10 system directly to the USB disk. The micro-pe boot disk supports greater than the 4G mirror image; insert the USB disk on the computer equipped with the ssd hard disk. In order to give full play to the speed of the solid-state disk, the first First, enter the BIOS to turn on the AHCI mode of the hard disk. The default of the new computer is ahci, which does not need to be changed.

2. Prepare the installation media: first needPrepare an installation media containing the operating system, which can be a Windows installation disc or a USB installation disk. Connect the solid-state drive: Connect the solid-state drive to the motherboard of the computer. You can use the SATA cable to connect, or use the M.2 interface to plug it directly into the motherboard.

3. PS: It is recommended not to partition SSD and hard disk, just create folder management; do not install the GHOST version of the WINDOWS system, only install the pure version of WINDOWS.

How to install Windows7 system under solid-state drive

For example, the installation of Win7 system, if it is installed to SSD with a USB flash drive, it only takes a few minutes.And the startup time of the system, on the traditional hard disk, may take more than 1 minute and 30 seconds, while on Win7 under SSD, you only need more than 10 seconds.

Method/Step 3: The third step is to install the system to SSD 1 with a USB flash drive. Next, we take the made USB disk boot disk. Take the installation of Win7 system as an example. Other XP and Win8 system installations are the same. Here we use Pucot M5S 256G solid-state drive installation. System.

Select the installation target: In the installation type interface, select the solid-state drive as the installation target of the operating system. If the solid-state drive has been partitioned and formatted, you can choose to install it directly on the partition or choose to clear the partition to recreate it.

There are users who intend to use 24G solid-state drivesInstall the win7 system, but I don't know how to install it. The USB flash drive is generally required to install the system on the solid-state drive, and because the 24G capacity is too small, it is recommended to install the win732-bit system. Next, the editor will introduce the method of installing the win7 system on the 24G solid-state drive.

solid-state drive installation system and partition

1. Solid-state drive as a system and partition is exactly the same as a mechanical drive. It's better to install it directly with the original Microsoft CD. But the difference from the mechanical hard disk is that to turn on the AHCI mode, you must turn on the AHCI mode in the bios. Generally, new computers, such as those purchased within 2 years, basically don't have to worry about it, because there is only AHCI mode.

2. Solid-state drive partitionWhen partitioning a solid-state drive, pay attention to 4K alignment (that is, the sector allocated by the partition is an integer multiple of 8 sectors, and there is a special option for partitioning the partition tool), and it is aligned by default when partitioning with WIN7 or above systems. Before setting up the BIOS to install the system, turn on the hard disk working mode ACHI in the BIOS and then install the system.

3. Right-click on the solid-state drive space and click "Create New Partition" on the pop-up menu. In the interface that appears, select the partition type as "main disk partition". Our system is installed in the main disk partition, which is the so-called system disk.

4. Select the installation target: In the installation type interface, select the solid-state drive as the installation target of the operating system. If the solid-state drive has been partitioned and formatted, you can choose to install it directly on the partition or choose to clear the partition to recreate it.

5. When installing, you can use the requirements of the WINDOWS installer to format the SSD first, so that the installed SSD will be automatically aligned 4K; PS: It is recommended not to partition the SSD and hard disk, just create a folder management; do not install the GHOST version of the WINDOWS system , only install the pure version of WINDOWS.

Solid State Drive Installation System Detailed Tutorial

Select to enter PE and then reformat and partition your old hard disk. ( If the SSD capacity is large enough, it is recommended to divide it into two disks, one only installs the system and the other installs common applications. In this way, it will be smoother and more comfortable to use, and the system disk is at least 60GB or more).

Procurement oneA solid-state drive, first check the capacity and interface of the solid-state drive. Now there are many interface types of solid-state drives, such as SATA, PCI, etc. After confirming the interface, we install the solid-state drive on the motherboard of the computer and set the solid-state drive as the main hard disk in the BIOS.

The transmission speed of solid-state drives is much faster than that of ordinary hard disks, and it is generally used as a system disk installation system.

The steps are as follows: After installing the hard disk on the computer, turn it on, on the computer desktop, select My Computer and right-click "Management" to enter the computer management interface. Select "Disk Management", and the system will pop up to detect a new hard disk and ask to initialize the hard disk. As shown in the figure, click: "OK" to initialize.

Paragraph 1: Preparation of tools and materials Before installing the system to the solid-state drive, you need to prepare some tools and materials.First of all, you need a usable solid-state drive to ensure that its capacity meets your needs. Secondly, you need a reliable system installation media, such as a Windows or Linux installation CD or USB drive.