Brake system alarm light: an exclamation mark in a circle and a parenthesete on the outside. When the light is on, it means: the brake pad of the brake is seriously worn or failed; the brake fluid level is too low and deteriorated; the parking brake is turned on and closed; the brake light is on and the ABS is also on at the same time, indicating that the ABS is faulty; the brake system fails and other reasons.
The usual fault indicator light is an exclamation mark in the middle of the triangle. The following situations will light up: the clutch transmission clutch is overheated; the car's fuel supply system fails and there is no fuel; the parking sensor fails; the headlight is broken; the engine oil pressure sensor fails; the drive anti-skid system warns or fails.
The exclamation mark fault light is the reason why the system detects a fault or abnormal situation. When an exclamation mark appears on the dashboard of the car, there is an exclamation mark in the middle of the triangle.
Brake system failure is a common alarm situation. The alarm icon is an exclamation mark inside the circle and a small bracket outside the circle. In the idle state of the car, the dashboard of the handbrake will be displayed. This is a normal prompt. If it is still prompted after completely lowering the handbrake, it may be an abnormality of the brake system, which must Inspection and repair must be carried out in time.
Zhou Zhou talked about cars 2023-06-03 · TA got more than 362 likes. Follow. Expand all. What does the triangular exclamation mark on the dashboard mean? The triangle yellow indicator light on the dashboard. There is a yellow exclamation mark in the middle. The whole icon is yellow. This indicator light indicates the car. The indicator light of a conventional fault.
There is an exclamation mark in the middle of the triangle, which is a conventional fault display light. This light lights up to remind you to turn off the driving control system. If this light is on and always on when the drive system is started, it indicates that there is a problem with TCS. There is an exclamation mark in the middle of the bracket circle, which is the warning light of the brake system.
There are basically three types of exclamation mark warning lights on the dashboard of the car: an exclamation mark in the middle of the triangle, which is a conventional fault indicator light, and this indicator light is a TCS (drive force, that is, ground adhesion control system) indicator light.
There are about three kinds of exclamation mark warning lights on the car dashboard: an exclamation mark in the middle of the triangle, which is a conventional fault display light.
The exclamation mark on the dashboard of the car indicates that the car is malfunctioning. The specific introduction is as follows: conventional fault display light: an exclamation mark in the middle of the triangle. This is a conventional fault display light.
An exclamation mark in the middle of the triangle is a conventional fault display light; an exclamation mark appears in the middle of the bracket circle, which is a brake system warning light; bracketAn exclamation mark appears in the middle of the horizontal below the number, which is a tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
The meaning of the exclamation mark on the car is as follows: an exclamation mark in a light bulb is a bulb fault light. An exclamation mark in a gear is a gearbox fault light. An exclamation mark in a circle is a brake fault light. An exclamation mark next to the steering wheel is the steering assistance fault light.
Most of the red exclamation mark icons refer to the warning lights of the brake system. It will light up in the following conditions: the car will light up for a few seconds after turning on the ignition switch, and turn off after starting the engine. It lights up when you pull up the handbrake and turns off when you put it down. The brake fluid level is too low, and it lights up during driving.
Some cars light up for a few seconds after turning on the ignition switch, and turn off after starting the engine; it lights up when the hand brake is pulled up and turns off when it is put down; the brake fluid level is too low, and it lights up during driving; system The system malfunctions and lights up. There is an exclamation mark in the middle of the horizontal brackets.
Indicates that the gearbox is faulty or the lubricating oil needs to be replaced. The solution to the exclamation mark on the car: turn off the drive control system or check the maintenance TCS; go to the repair shop to check the air pressure of the tires and check whether there is any foreign matter on the surface of the tire; replace the lubricating oil or overhaul the gearbox.
When driving, if an exclamation mark warning light appears on the dashboard, it means that the vehicle is faulty and needs to be dealt with in time. Different exclamation marks represent different faults.If it is an exclamation mark with a circle and parentheses, as shown in the figure, this representative means the brake system fault light.
Conventional fault. There is an exclamation mark in the triangle. If this symbol lights up, it means that the normal performance of the car or the parts and functions have failed. There are mainly parking sensor failure, oil cut-off system intervention or failure, external light failure, engine oil pressure sensor failure, etc. You need to go to the 4S store for maintenance and find out the source of the fault.
1 exclamation mark in the middle of the triangle, which is the conventional fault display light, and 1 exclamation mark in the middle of the bracket circle, which is the brake system warning light. There is an exclamation mark in the middle of the horizontal part of the parentheses. This is the tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
The exclamation mark of the car fault light is a failure of the vehicle, reminding the owner that the vehicle needs to be overhauled. The car fault light indicates that there are many reasons, such as engine failure, gearbox failure, brake system failure, water temperature failure, etc. It is necessary to check and confirm the vehicle fault according to the display on the vehicle dashboard.
There are about three types of exclamation sign warning lights on the dashboard of the car: 1 exclamation mark in the middle of the triangle. This is a conventional fault display light, which mainly lights up in the following situations.
What is the reason why the exclamation mark fault light is on? The exclamation mark fault light is on is the reason why the system detects a fault or abnormal situation. The clutch of the dry dual-clutch gearbox is overheated. Parking sensor failure. The oil cut-off system intervenes or fails. The light bulb of the exterior light of the car is broken. Drive anti-skid system warning or failure.
1 exclamation mark in the middle of the triangle, which is the conventional fault display light, and an exclamation mark in the middle of the bracket circle, which is the brake system warning light. There is an exclamation mark in the middle of the horizontal part of the parentheses. This is the tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
1 exclamation mark in the middle of the triangle, which is a conventional fault indicator light, and this indicator light is a TCS (drive force, that is, ground adhesion control system) indicator light.
There are about three kinds of exclamation mark warning lights on the car dashboard: an exclamation mark in the middle of the triangle, which is a conventional fault display light.
The exclamation mark on the dashboard of the car indicates that the car is malfunctioning.The specific introduction is as follows: conventional fault display light: an exclamation mark in the middle of the triangle. This is a conventional fault display light.
The meaning of the exclamation mark on the car is as follows: an exclamation mark in a light bulb is a bulb fault light. An exclamation mark in a gear is a gearbox fault light. An exclamation mark in a circle is a brake fault light. An exclamation mark next to the steering wheel is the steering assistance fault light.
1 exclamation mark in the middle of the triangle is a conventional fault display light; an exclamation mark appears in the middle of the bracket circle, which is a brake system warning light; an exclamation mark appears in the horizontal middle below the bracket, which is a tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
HS code-based transport cost modeling-APP, download it now, new users will receive a novice gift pack.
Brake system alarm light: an exclamation mark in a circle and a parenthesete on the outside. When the light is on, it means: the brake pad of the brake is seriously worn or failed; the brake fluid level is too low and deteriorated; the parking brake is turned on and closed; the brake light is on and the ABS is also on at the same time, indicating that the ABS is faulty; the brake system fails and other reasons.
The usual fault indicator light is an exclamation mark in the middle of the triangle. The following situations will light up: the clutch transmission clutch is overheated; the car's fuel supply system fails and there is no fuel; the parking sensor fails; the headlight is broken; the engine oil pressure sensor fails; the drive anti-skid system warns or fails.
The exclamation mark fault light is the reason why the system detects a fault or abnormal situation. When an exclamation mark appears on the dashboard of the car, there is an exclamation mark in the middle of the triangle.
Brake system failure is a common alarm situation. The alarm icon is an exclamation mark inside the circle and a small bracket outside the circle. In the idle state of the car, the dashboard of the handbrake will be displayed. This is a normal prompt. If it is still prompted after completely lowering the handbrake, it may be an abnormality of the brake system, which must Inspection and repair must be carried out in time.
Zhou Zhou talked about cars 2023-06-03 · TA got more than 362 likes. Follow. Expand all. What does the triangular exclamation mark on the dashboard mean? The triangle yellow indicator light on the dashboard. There is a yellow exclamation mark in the middle. The whole icon is yellow. This indicator light indicates the car. The indicator light of a conventional fault.
There is an exclamation mark in the middle of the triangle, which is a conventional fault display light. This light lights up to remind you to turn off the driving control system. If this light is on and always on when the drive system is started, it indicates that there is a problem with TCS. There is an exclamation mark in the middle of the bracket circle, which is the warning light of the brake system.
There are basically three types of exclamation mark warning lights on the dashboard of the car: an exclamation mark in the middle of the triangle, which is a conventional fault indicator light, and this indicator light is a TCS (drive force, that is, ground adhesion control system) indicator light.
There are about three kinds of exclamation mark warning lights on the car dashboard: an exclamation mark in the middle of the triangle, which is a conventional fault display light.
The exclamation mark on the dashboard of the car indicates that the car is malfunctioning. The specific introduction is as follows: conventional fault display light: an exclamation mark in the middle of the triangle. This is a conventional fault display light.
An exclamation mark in the middle of the triangle is a conventional fault display light; an exclamation mark appears in the middle of the bracket circle, which is a brake system warning light; bracketAn exclamation mark appears in the middle of the horizontal below the number, which is a tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
The meaning of the exclamation mark on the car is as follows: an exclamation mark in a light bulb is a bulb fault light. An exclamation mark in a gear is a gearbox fault light. An exclamation mark in a circle is a brake fault light. An exclamation mark next to the steering wheel is the steering assistance fault light.
Most of the red exclamation mark icons refer to the warning lights of the brake system. It will light up in the following conditions: the car will light up for a few seconds after turning on the ignition switch, and turn off after starting the engine. It lights up when you pull up the handbrake and turns off when you put it down. The brake fluid level is too low, and it lights up during driving.
Some cars light up for a few seconds after turning on the ignition switch, and turn off after starting the engine; it lights up when the hand brake is pulled up and turns off when it is put down; the brake fluid level is too low, and it lights up during driving; system The system malfunctions and lights up. There is an exclamation mark in the middle of the horizontal brackets.
Indicates that the gearbox is faulty or the lubricating oil needs to be replaced. The solution to the exclamation mark on the car: turn off the drive control system or check the maintenance TCS; go to the repair shop to check the air pressure of the tires and check whether there is any foreign matter on the surface of the tire; replace the lubricating oil or overhaul the gearbox.
When driving, if an exclamation mark warning light appears on the dashboard, it means that the vehicle is faulty and needs to be dealt with in time. Different exclamation marks represent different faults.If it is an exclamation mark with a circle and parentheses, as shown in the figure, this representative means the brake system fault light.
Conventional fault. There is an exclamation mark in the triangle. If this symbol lights up, it means that the normal performance of the car or the parts and functions have failed. There are mainly parking sensor failure, oil cut-off system intervention or failure, external light failure, engine oil pressure sensor failure, etc. You need to go to the 4S store for maintenance and find out the source of the fault.
1 exclamation mark in the middle of the triangle, which is the conventional fault display light, and 1 exclamation mark in the middle of the bracket circle, which is the brake system warning light. There is an exclamation mark in the middle of the horizontal part of the parentheses. This is the tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
The exclamation mark of the car fault light is a failure of the vehicle, reminding the owner that the vehicle needs to be overhauled. The car fault light indicates that there are many reasons, such as engine failure, gearbox failure, brake system failure, water temperature failure, etc. It is necessary to check and confirm the vehicle fault according to the display on the vehicle dashboard.
There are about three types of exclamation sign warning lights on the dashboard of the car: 1 exclamation mark in the middle of the triangle. This is a conventional fault display light, which mainly lights up in the following situations.
What is the reason why the exclamation mark fault light is on? The exclamation mark fault light is on is the reason why the system detects a fault or abnormal situation. The clutch of the dry dual-clutch gearbox is overheated. Parking sensor failure. The oil cut-off system intervenes or fails. The light bulb of the exterior light of the car is broken. Drive anti-skid system warning or failure.
1 exclamation mark in the middle of the triangle, which is the conventional fault display light, and an exclamation mark in the middle of the bracket circle, which is the brake system warning light. There is an exclamation mark in the middle of the horizontal part of the parentheses. This is the tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
1 exclamation mark in the middle of the triangle, which is a conventional fault indicator light, and this indicator light is a TCS (drive force, that is, ground adhesion control system) indicator light.
There are about three kinds of exclamation mark warning lights on the car dashboard: an exclamation mark in the middle of the triangle, which is a conventional fault display light.
The exclamation mark on the dashboard of the car indicates that the car is malfunctioning.The specific introduction is as follows: conventional fault display light: an exclamation mark in the middle of the triangle. This is a conventional fault display light.
The meaning of the exclamation mark on the car is as follows: an exclamation mark in a light bulb is a bulb fault light. An exclamation mark in a gear is a gearbox fault light. An exclamation mark in a circle is a brake fault light. An exclamation mark next to the steering wheel is the steering assistance fault light.
1 exclamation mark in the middle of the triangle is a conventional fault display light; an exclamation mark appears in the middle of the bracket circle, which is a brake system warning light; an exclamation mark appears in the horizontal middle below the bracket, which is a tire pressure monitoring warning light. When the air pressure of a tire of the vehicle is too low, the warning light turns on.
Trade data integration with BI tools
author: 2024-12-23 11:37HS code-based negotiation with customs
author: 2024-12-23 11:15Dynamic duty drawback calculations
author: 2024-12-23 10:20Global trade certificate verification
author: 2024-12-23 09:56HS code-driven trade finance optimization
author: 2024-12-23 09:50Global trade corridor analysis
author: 2024-12-23 11:45Global trade agreement analysis
author: 2024-12-23 10:29HS code utilization in trade feasibility studies
author: 2024-12-23 10:26Energy sector HS code compliance
author: 2024-12-23 10:07HS code integration in trade blockchains
author: 2024-12-23 09:09496.54MB
Check763.33MB
Check852.28MB
Check271.79MB
Check111.85MB
Check936.92MB
Check939.24MB
Check684.28MB
Check376.23MB
Check421.35MB
Check342.92MB
Check243.25MB
Check275.35MB
Check476.46MB
Check152.46MB
Check771.12MB
Check998.21MB
Check877.32MB
Check585.91MB
Check811.72MB
Check865.29MB
Check325.39MB
Check752.35MB
Check151.42MB
Check472.48MB
Check215.94MB
Check656.54MB
Check612.68MB
Check814.64MB
Check389.61MB
Check792.55MB
Check534.16MB
Check148.54MB
Check166.22MB
Check121.83MB
Check816.56MB
CheckScan to install
HS code-based transport cost modeling to discover more
Netizen comments More
727 Global trade barrier analysis
2024-12-23 11:13 recommend
1820 How to track multiple supply chain tiers
2024-12-23 11:10 recommend
1559 Country-of-origin rules by HS code
2024-12-23 10:41 recommend
193 HS code utilization for tariff refunds
2024-12-23 10:05 recommend
2598 Real-time customs data reports
2024-12-23 09:07 recommend