Dynamic trade data cleansing

List of contents of this article:

• 1, What to do with the black screen during the computer reinstallation system
• 2、What to do with the black screen of the computer after reinstalling the system
• 3, Why does my computer have a black screen when the win7 system is installed?
• 4, What's wrong with the black screen after the computer reinstalls the system

What to do with the black screen during the computer reinstallation system

If in the process of resetting the computer If a black screen appears, you can try the following method: wait for a period of time: sometimes the computer will get stuck during the reset process or it will take longer to complete the operation, so you can wait for a while to see if it will be automatically restored.

Solution: Damage the dominant partition, replace the hardware. The capacity of the C disk is insufficient, and the space is expanded. The mirror file is damaged and the download is heavy. When installing the system, check whether your computer can support the system.

Reinstall the system and encounter blackIn the case of the screen, users can format all the computer hard disks, partition to rebuild the boot, and then reinstall the system. If the hard disk cannot be formatted, you can delete the hard disk and reload the hard disk, and finally re-partition and reinstall the system.

Generally, when you encounter the problem that the computer often has a black screen, first check whether the computer hardware is damaged. If there is no problem with the hardware, consider reinstalling the system. Insert the made USB boot disk into the computer that needs a black screen, press the boot hotkey continuously when booting, and select the USB option to enter PE. After entering PE, select the system in the USB flash drive for installation.

In the process of system file damage system recovery, many system files are in the "open" state and suddenly shut down, then these system files will be destroyed and cannot continue to run and be used.Therefore, when the computer is started again, the system does not work properly, and the black screen is one of its performance methods.

If a black screen appears in the process of resetting the computer, you can try the following method: Wait for a period of time: Sometimes the reset process takes a long time, which may be because the system is doing some complex operations. It is recommended to wait patiently for a period of time. Check the power supply: make sure that the power cord of the computer is firmly connected and the power socket is working normally.

What to do with the black screen of the computer after reinstalling the system

Check hardware problems: First of all, you need to eliminate hardware problems, such as ensuring that the computer hardware is normal, checking whether the graphics card is plugged in, whether the monitor is connected normally, etc. Check BIOS settings: Enter the BIOS interface and check whether the hardware settings, display options, etc. are correct.If you need to reset, follow the system installation instructions.

To solve such problems, you need to reinstall or uninstall the graphics card driver through safe mode or PE system, and you need to download the latest version suitable for your graphics card model. Operating system problems: Errors may occur during the installation of the operating system, or the installed version may not match.

If your computer has a black screen problem after reinstalling the system, you can try the following solutions: Check the hardware connection: Make sure that all hardware connections are normal. Check the power cord, monitor cable, graphics card connection, etc., and make sure that they are all firmly connected.

If a black screen appears in the process of resetting the computer, you can try the following methods: Wait for a period of time: Sometimes it has been resetThe process takes a long time, probably because the system is doing some complex operations. It is recommended to wait patiently for a while. Check the power supply: make sure that the power cord of the computer is firmly connected and the power socket is working normally.

After reinstalling the system, the computer's monitor does not support this resolution, resulting in a black screen on the computer. At this time, we can enter the BIOS to make the corresponding settings.

Why does my computer have a black screen when the win7 system is installed?

It is necessary to confirm the accurate and complete motherboard model. Generally speaking, the motherboards of ASUS 100, 200 series and 365 chips can install win7, while other 300 series do not support win7 systems. Therefore, the installation error should be a problem with the system and mirror image. It is recommended to try other versions of the system.

Check system hardware compatibility: Make sure your computer hardware is compatible with the Windows 7 operating system. Check the official website or documents of the computer manufacturer to see if there are instructions on hardware compatibility. In particular, check whether the motherboard, graphics card and other important hardware devices support Windows 7.

Recommendation: Software problems, reasons for operating system settings, such as screen protection, power management. In addition, the incompatibility of the display card driver will also cause a black screen on the computer. In this case, you only need to reinstall the driver and debug the system to solve it.

What's wrong with the black screen after the computer reinstalls the system

The black screen after the computer reinstalls the system has the following reasons: check whether the monitor cable is firmly inserted into the host interface. Check whether the contact between the graphics card and the motherboard slot is good. Check whether the computer monitor is damaged. Check whether the CPU fan is running. If the computer still has a black screen, it is recommended to replace the motherboard.

The system problem may be the loss of system files, orThe hardware has changed, such as replacing the motherboard or graphics card, and the system cannot recognize it, resulting in a black screen. In this regard, you can repair and install it again. Of course, the best way is to reinstall the system.

The black screen after reinstalling the system is usually caused by problems with the system installation or configuration. The solution is as follows: Check hardware problems: First of all, it is necessary to eliminate hardware problems, such as ensuring that the computer hardware is normal, checking whether the graphics card is plugged in, whether the monitor is connected normally, etc.

If a black screen or blue screen appears after reinstalling the system with Xiaobai, it is likely that the disk partition and the boot mode in the bios do not correspond. Check the disk partition and reinsert the USB boot disk into pe. Click the DG partition tool on the desktop to check whether the disk partition is mbr or gpt partition.

If your computer has a black screen after reinstalling the system, there may be the following situations and solutions: Check whether the correct boot device is selected: First, you need to confirm whether the boot order you set is correct and ensure that the computer starts from the USB flash drive first.