1. Use the partition tool to format the partition first and then install the system. BIO.S settings start up and press the corresponding key (Delete, F2 are more commonly used according to different choices of BIOS, generally there are prompts on the screen) to enter the BIOS settings. CD-ROM startup finds the boot startup item and sets it to "CD-ROM" startup. Put in the CD and save to exit.
2. Enter the installation 1) Restart the computer and move the highlight bar to the CDROM with the arrow key. At this time, insert the XP CD into the optical drive 2) When Press any key to boot from CD appears, immediately return 3) For a moment, the screen appears welcome In the installer interface, select Install Now.
3. After restarting, take out the CD, let the computer start from the hard disk, and enter the setting window of XP. Press "Next", "Skip", and select "Do not register" and "Done".Enter the XP system desktop.
4. After restarting, enter the XP desktop. At this time, the desktop only has the recycle bin shortcut icon and the taskbar. Right-click on the desktop, select "Properties"--"Desktop"--"Custom Desktop"--check "My Computer", "Online Neighbors", etc.--"OK" and return to the desktop. .
5. The grid machine you are talking about is to reinstall the system. The following are the specific steps to reinstall the system. Prepare the installation disk and prepare an XP installation disk with startup function. Prepare a hard disk Prepare an initialized hard disk (i.e. a partitioned, formatted hard disk with enough space to accommodate XP system files).
1. The specific steps are as follows. First of all, we need an installation tool to help us complete the system reinstallation. Download Fat Claw Installation Assistant:, and then click "Software Download" to complete the installation of the program. You need to pay attention to turning off the third-party anti-virus software on the computer, otherwise it will cause false alarms.
2. Prepare a Windows XP CD, write down the installation serial number of the CD on the paper, and then you can start installing the system. To use the CD-ROM installation, you must first set the computer in the BIOS to start from the CD-ROM, that is, when the computer starts, press the Del key in the self-test. After the self-test, the BIOS interface will be displayed.
3. The specific operation is as follows: First, go to the system download base to download the deep technology GHOST XP SP3 operating system.Then unzip the downloaded XP operating system to disk D, and never decompress it to disk C.
4. Restart the computer after completion. 8) After starting, load the device program without intervention. 9) The next step is to follow the prompts.
1, · Key point one: Enter the serial number Here we need to enter the serial number of Windows XP to proceed to the next installation. Generally speaking, we can Find the serial number on the box. · Point 2: Set up a network connection. The network is an important part of the XP system and is also indispensable for current life.
2. Put in the XP installation CD before restarting, and press Enter when you see the CD word at the bottom of the screen.Only then can the light start, otherwise the computer will start to read the hard disk, that is, skip the light start to start from the hard disk.
3. The easiest way is to reinstall the system. The general way to install the system with a USB flash drive: make a PE boot disk and make a PE boot disk with a USB flash drive. FOR WIN10/W7 SYSTEM, PLEASE USE A USB DISK ABOVE 8G, AND A USB DISK ABOVE 4G FOR XP SYSTEM. THE LARGER THE CAPACITY, THE MORE SYSTEMS WILL BE STORED. DOWNLOAD PE BOOT USB DISK MAKING SOFTWARE SUCH LIKE DEPTH AND CABBAGE, AND MAKE THE BOOT DISK ACCORDING TO THE PROMPTS.
4. The grid machine you mentioned is to reinstall the system. The following are the specific steps to reinstall the system. Prepare the installation disk and prepare an XP installation disk with startup function. Prepare a hard disk Prepare an initialized hard disk (i.e. a partitioned, formatted hard disk with enough space to accommodate XP system files).
Top trade data APIs for developers-APP, download it now, new users will receive a novice gift pack.
1. Use the partition tool to format the partition first and then install the system. BIO.S settings start up and press the corresponding key (Delete, F2 are more commonly used according to different choices of BIOS, generally there are prompts on the screen) to enter the BIOS settings. CD-ROM startup finds the boot startup item and sets it to "CD-ROM" startup. Put in the CD and save to exit.
2. Enter the installation 1) Restart the computer and move the highlight bar to the CDROM with the arrow key. At this time, insert the XP CD into the optical drive 2) When Press any key to boot from CD appears, immediately return 3) For a moment, the screen appears welcome In the installer interface, select Install Now.
3. After restarting, take out the CD, let the computer start from the hard disk, and enter the setting window of XP. Press "Next", "Skip", and select "Do not register" and "Done".Enter the XP system desktop.
4. After restarting, enter the XP desktop. At this time, the desktop only has the recycle bin shortcut icon and the taskbar. Right-click on the desktop, select "Properties"--"Desktop"--"Custom Desktop"--check "My Computer", "Online Neighbors", etc.--"OK" and return to the desktop. .
5. The grid machine you are talking about is to reinstall the system. The following are the specific steps to reinstall the system. Prepare the installation disk and prepare an XP installation disk with startup function. Prepare a hard disk Prepare an initialized hard disk (i.e. a partitioned, formatted hard disk with enough space to accommodate XP system files).
1. The specific steps are as follows. First of all, we need an installation tool to help us complete the system reinstallation. Download Fat Claw Installation Assistant:, and then click "Software Download" to complete the installation of the program. You need to pay attention to turning off the third-party anti-virus software on the computer, otherwise it will cause false alarms.
2. Prepare a Windows XP CD, write down the installation serial number of the CD on the paper, and then you can start installing the system. To use the CD-ROM installation, you must first set the computer in the BIOS to start from the CD-ROM, that is, when the computer starts, press the Del key in the self-test. After the self-test, the BIOS interface will be displayed.
3. The specific operation is as follows: First, go to the system download base to download the deep technology GHOST XP SP3 operating system.Then unzip the downloaded XP operating system to disk D, and never decompress it to disk C.
4. Restart the computer after completion. 8) After starting, load the device program without intervention. 9) The next step is to follow the prompts.
1, · Key point one: Enter the serial number Here we need to enter the serial number of Windows XP to proceed to the next installation. Generally speaking, we can Find the serial number on the box. · Point 2: Set up a network connection. The network is an important part of the XP system and is also indispensable for current life.
2. Put in the XP installation CD before restarting, and press Enter when you see the CD word at the bottom of the screen.Only then can the light start, otherwise the computer will start to read the hard disk, that is, skip the light start to start from the hard disk.
3. The easiest way is to reinstall the system. The general way to install the system with a USB flash drive: make a PE boot disk and make a PE boot disk with a USB flash drive. FOR WIN10/W7 SYSTEM, PLEASE USE A USB DISK ABOVE 8G, AND A USB DISK ABOVE 4G FOR XP SYSTEM. THE LARGER THE CAPACITY, THE MORE SYSTEMS WILL BE STORED. DOWNLOAD PE BOOT USB DISK MAKING SOFTWARE SUCH LIKE DEPTH AND CABBAGE, AND MAKE THE BOOT DISK ACCORDING TO THE PROMPTS.
4. The grid machine you mentioned is to reinstall the system. The following are the specific steps to reinstall the system. Prepare the installation disk and prepare an XP installation disk with startup function. Prepare a hard disk Prepare an initialized hard disk (i.e. a partitioned, formatted hard disk with enough space to accommodate XP system files).
How to track competitor import export data
author: 2024-12-23 10:53Trade data for GDP correlation analysis
author: 2024-12-23 10:28Industry-specific trade growth forecasts
author: 2024-12-23 10:01HS code-based tariff calculations
author: 2024-12-23 09:29HS code-based customs valuation tools
author: 2024-12-23 10:23How to ensure tariff compliance
author: 2024-12-23 09:09355.86MB
Check453.14MB
Check999.19MB
Check892.35MB
Check363.77MB
Check548.79MB
Check132.35MB
Check345.74MB
Check879.39MB
Check368.74MB
Check359.55MB
Check989.31MB
Check458.74MB
Check568.52MB
Check674.39MB
Check216.65MB
Check886.63MB
Check662.84MB
Check125.48MB
Check782.79MB
Check553.21MB
Check789.37MB
Check879.69MB
Check413.86MB
Check132.87MB
Check244.82MB
Check352.71MB
Check396.86MB
Check388.36MB
Check875.19MB
Check441.78MB
Check183.31MB
Check147.91MB
Check419.59MB
Check836.56MB
Check884.52MB
CheckScan to install
Top trade data APIs for developers to discover more
Netizen comments More
2907 Integrated circuits HS code verification
2024-12-23 11:23 recommend
2847 Steel industry HS code references
2024-12-23 11:22 recommend
1626 Global trade data warehousing solutions
2024-12-23 11:06 recommend
1254 Top trade data trends reports
2024-12-23 10:20 recommend
1263 HS code utilization for tariff refunds
2024-12-23 09:58 recommend