How to measure trade KPIs

Engine disassembly,How to measure trade KPIs restart the repair engine. The engine is the heart of a car and one of the key parts of the whole car. Only when it runs normally can the vehicle run smoothly. But sometimes, due to various reasons, the engine may fail. At this time, it is necessary to disassemble the engine and restart it for repair to ensure the normal operation of the vehicle. Next, let's take a closer look at the steps and precautions for engine disassembly. Steps for engine disassembly Step 1: Preparations need to be prepared before disassembling the engine. First of all, you need to park the vehicle on the flat ground and stop the engine. Secondly, it is necessary to remove the cable of the negative pole of the battery to avoid injury caused by accidental electric shock. Then, the coolant needs to be discharged to avoid polluting the environment. Finally, it is necessary to remove the bolts, pipelines and other parts installed in the engine to separate the engine from the frame.Step 2: When disassembling the engine, it needs to be decomposed into multiple parts. First of all, you need to remove the cylinder head, and remove the valve and rocker arm. Then, you need to remove the piston and connecting rod components, and pay attention to keep the components clean and tidy. Finally, it is necessary to remove the crankshaft and shock absorber to decompose the engine into multiple parts. Step 3: Clean and check the engine. After disassembling the engine, it needs to be cleaned and checked. First of all, you need to use solution or detergent to clean the engine to remove oil scale, stains, etc. on its surface. Then, it is necessary to check all parts of the engine, and replace or repair the problematic parts in time. Finally, it is also necessary to check the parts, including rocker arms, crankshafts, pistons, connecting rods, etc., and the problematic parts that also need to be replaced or repaired in time.Step 4: Assemble the engine. After cleaning and checking the engine, it needs to be assembled. First of all, it is necessary to assemble the parts in the correct order to ensure that they match and cooperate with each other. Then, lubricate each part to ensure their smooth operation. Finally, conduct an engine test to ensure that the engine is running normally. Precautions for engine disassembly Engine disassembly is a very complicated task, and the following points need to be noted: 1. Before disassembling the engine, it is necessary to understand the structure and working principle of each part of the engine to ensure that it can be decomposed and assembled correctly. Two. When disassembling and assembling the engine, it is necessary to use the correct tools and equipment to avoid damage to the parts. 3. During the disassembly and assembly process, it is necessary to keep the parts clean and tidy to avoid dust and impurities contaminating the parts.Four. In the process of assembling the engine, it is necessary to ensure the accuracy and matching between the parts to avoid mechanical failure. 5. When conducting engine tests, appropriate test equipment and methods need to be used to ensure that the engine is running normally. In a word, engine disassembly is a very complex and rigorous task, which requires professional technical training and practical experience to be proficient. When disassembling the engine, it is necessary to strictly abide by the relevant rules and regulations and operating standards to ensure the safety and reliability of the disassembly and assembly process.

Contact Us
Phone：020-83484676