The way to turn on the cold air in the car air conditioner: just need to turn on the air conditioner switch, and then press the A/C button; then turn the hot and cold conversion to the blue position; if it is an automatic air conditioner, you only need to press the auto button and the A/C button.
The method of turning on the cold air inside the air conditioner 1 Generally, the cold air button is on the left side of the car. Blue represents cold, red represents heating, and the middle gear represents cold and warm.Turn on the cold air in the middle and adjust the knob to the blue place. 2 When you want to turn on the warm air, adjust it to the red place and press the AC switch. The middle knob is the size of the wind speed, and the right knob is to adjust the angle.
When you turn on the air conditioner for the first time, you should blow it empty first. When turning on the refrigeration, you can turn the air outlet of the air conditioner up and blow the cold air upwards as much as possible, so as to achieve natural convection circulation in the car and improve the refrigeration efficiency.
1. In fact, if you want to lower the temperature inside the car as soon as possible, the correct thing to do is to open the doors and windows, keep the inside and outside of the car ventilated, so that the temperature inside the car is as close as possible to the outside temperature, and then close the doors and windows and start the air conditioner, so that the cooling effect of the air conditioner will be better. The internal and external cycles should be used alternately. When driving in summer, many people like to drive an internal cycle for a long time.
2. When turning on the air conditioner, the external circulation of the air conditioner should be turned on first. Because the interior temperature of a car can be as high as 60 or 70 degrees Celsius after being exposed to the sun. You should first open the door and window for ventilation, and then turn on the external circulation of the air conditioner. When the temperature inside and outside the car is similar, close the window and turn on the inner circulation.
3. Insert the key into the keyhole. Turn the key to start the vehicle. Turn on the car air conditioner knob, which can be adjusted to 4 or 4 gears. The higher the gear, the greater the air output. Adjust the air conditioner to the refrigeration part, that is, the blue area shown in the figure below. The lower it is, the stronger the refrigeration effect will be.
1. The way to turn on the cold air in the car air conditioner: just need to turn on the air conditioning switch, and then press the A/C button; then turn the hot and cold conversion to the blue position; if it is automatic Adjust, just press the auto button and the A/C button.
2. Automatic transmission vehicle refrigeration If the automatic transmission vehicle wants to cool down, press the "AUTO" button and the "A/C" button on the car after turning on the air conditioner.
3. The method of turning on the car air conditioner refrigeration is as follows: First, it needs to be ignited and started. Only after the vehicle starts, turning on the refrigeration and air conditioner will it be effective. Find the knob with red and blue logos. Usually, red represents heating and blue represents refrigeration. Rotate the knob to the blue area and choose the appropriate strength. MAX is the strongest.
4. The method of turning on the car air conditioner refrigeration is as follows: 1 First of all, it needs to be ignited and started. Only after the vehicle is started, turning on the refrigeration air conditioner will have an effect. 2 Find the knob with red and blue logos. Usually, red represents heating, and blue represents refrigeration. Rotate the knob to the blue area and select the appropriate intensity, MA The strongest 3 in X chooses to blow the wind.
Compression process: The compressor sucks in the low-temperature and low-pressure refrigerant gas at the outlet of the evaporator and compresses it into high-temperature and high-pressure gas to discharge the compressor. Heat dissipation process: high-temperature and high-pressure overheated refrigerant gas enters the condenser. Due to the reduction of pressure and temperature, the refrigerant gas condenses into liquid and discharges a large amount of heat.
Compression process: The compressor compresses the low-temperature and low-pressure gaseous refrigerant on the low-pressure side of the evaporator into a high-temperature gasic refrigerant and sends it to the condenser for cooling.
Generally, the blue button on the left side of the car is air conditioning, the red button is heating, and the middle is moderate temperature. The way to turn on the car air conditioner is to turn on the fan, press the A/C button, and adjust the temperature to the low temperature zone. In addition, the button in the middle controls the air volume, and the button on the right is the adjustable mode.
1. Compression process: Inhale the low-temperature and low-pressure refrigerant gas at the outlet of the evaporator and compress it into high-temperature and high-pressure gas and discharge it into the compressor. Heat dissipation process: high-temperature and high-pressure overheated refrigerant gas enters the condenser, and condenses into liquid to exhaust heat due to the reduction of pressure and temperature.
2. Compression process: The compressor compresses the low-temperature and low-pressure gaseous refrigerant on the low-pressure side of the evaporator into a high-temperature gaseous refrigerant and sends it to the condenser for cooling.
3. Generally, the blue button on the left side of the car is air conditioning, the red button is heating, and the middle is moderate temperature. The way to turn on the car air conditioner is to turn on the fan, press the A/C button, and adjust the temperature to the low temperature zone. In addition, the button in the middle controls the air volume, and the button on the right is the adjustable mode.
4. The automobile air conditioning refrigeration system is mainly composed of compressor, evaporator, condenser, drying bottle, expansion valve, blower, control mechanism, etc. Compression process: The compressor sucks in the low-temperature and low-pressure refrigerant gas at the outlet of the evaporator and compresses it into high-temperature and high-pressure gas and discharges it into the compressor.
5. Automobile air conditioning refrigeration is to use refrigerant as the heat carrier for refrigeration and dehumidification through refrigeration circulation. The refrigeration cycle can be summarized into four processes: compression, heat dissipation, throttling and heat absorption.
6. Heat absorption process: The fog-like refrigerant liquid enters the evaporator, so the boiling point of the refrigerant is much lower than the temperature in the evaporator, so the refrigerant liquid evaporates into gas. During the evaporation process, the ambient heat is widely absorbed, and then the low-temperature and low-pressure refrigerant steam enters the compressor again.
Top import export compliance guides-APP, download it now, new users will receive a novice gift pack.
The way to turn on the cold air in the car air conditioner: just need to turn on the air conditioner switch, and then press the A/C button; then turn the hot and cold conversion to the blue position; if it is an automatic air conditioner, you only need to press the auto button and the A/C button.
The method of turning on the cold air inside the air conditioner 1 Generally, the cold air button is on the left side of the car. Blue represents cold, red represents heating, and the middle gear represents cold and warm.Turn on the cold air in the middle and adjust the knob to the blue place. 2 When you want to turn on the warm air, adjust it to the red place and press the AC switch. The middle knob is the size of the wind speed, and the right knob is to adjust the angle.
When you turn on the air conditioner for the first time, you should blow it empty first. When turning on the refrigeration, you can turn the air outlet of the air conditioner up and blow the cold air upwards as much as possible, so as to achieve natural convection circulation in the car and improve the refrigeration efficiency.
1. In fact, if you want to lower the temperature inside the car as soon as possible, the correct thing to do is to open the doors and windows, keep the inside and outside of the car ventilated, so that the temperature inside the car is as close as possible to the outside temperature, and then close the doors and windows and start the air conditioner, so that the cooling effect of the air conditioner will be better. The internal and external cycles should be used alternately. When driving in summer, many people like to drive an internal cycle for a long time.
2. When turning on the air conditioner, the external circulation of the air conditioner should be turned on first. Because the interior temperature of a car can be as high as 60 or 70 degrees Celsius after being exposed to the sun. You should first open the door and window for ventilation, and then turn on the external circulation of the air conditioner. When the temperature inside and outside the car is similar, close the window and turn on the inner circulation.
3. Insert the key into the keyhole. Turn the key to start the vehicle. Turn on the car air conditioner knob, which can be adjusted to 4 or 4 gears. The higher the gear, the greater the air output. Adjust the air conditioner to the refrigeration part, that is, the blue area shown in the figure below. The lower it is, the stronger the refrigeration effect will be.
1. The way to turn on the cold air in the car air conditioner: just need to turn on the air conditioning switch, and then press the A/C button; then turn the hot and cold conversion to the blue position; if it is automatic Adjust, just press the auto button and the A/C button.
2. Automatic transmission vehicle refrigeration If the automatic transmission vehicle wants to cool down, press the "AUTO" button and the "A/C" button on the car after turning on the air conditioner.
3. The method of turning on the car air conditioner refrigeration is as follows: First, it needs to be ignited and started. Only after the vehicle starts, turning on the refrigeration and air conditioner will it be effective. Find the knob with red and blue logos. Usually, red represents heating and blue represents refrigeration. Rotate the knob to the blue area and choose the appropriate strength. MAX is the strongest.
4. The method of turning on the car air conditioner refrigeration is as follows: 1 First of all, it needs to be ignited and started. Only after the vehicle is started, turning on the refrigeration air conditioner will have an effect. 2 Find the knob with red and blue logos. Usually, red represents heating, and blue represents refrigeration. Rotate the knob to the blue area and select the appropriate intensity, MA The strongest 3 in X chooses to blow the wind.
Compression process: The compressor sucks in the low-temperature and low-pressure refrigerant gas at the outlet of the evaporator and compresses it into high-temperature and high-pressure gas to discharge the compressor. Heat dissipation process: high-temperature and high-pressure overheated refrigerant gas enters the condenser. Due to the reduction of pressure and temperature, the refrigerant gas condenses into liquid and discharges a large amount of heat.
Compression process: The compressor compresses the low-temperature and low-pressure gaseous refrigerant on the low-pressure side of the evaporator into a high-temperature gasic refrigerant and sends it to the condenser for cooling.
Generally, the blue button on the left side of the car is air conditioning, the red button is heating, and the middle is moderate temperature. The way to turn on the car air conditioner is to turn on the fan, press the A/C button, and adjust the temperature to the low temperature zone. In addition, the button in the middle controls the air volume, and the button on the right is the adjustable mode.
1. Compression process: Inhale the low-temperature and low-pressure refrigerant gas at the outlet of the evaporator and compress it into high-temperature and high-pressure gas and discharge it into the compressor. Heat dissipation process: high-temperature and high-pressure overheated refrigerant gas enters the condenser, and condenses into liquid to exhaust heat due to the reduction of pressure and temperature.
2. Compression process: The compressor compresses the low-temperature and low-pressure gaseous refrigerant on the low-pressure side of the evaporator into a high-temperature gaseous refrigerant and sends it to the condenser for cooling.
3. Generally, the blue button on the left side of the car is air conditioning, the red button is heating, and the middle is moderate temperature. The way to turn on the car air conditioner is to turn on the fan, press the A/C button, and adjust the temperature to the low temperature zone. In addition, the button in the middle controls the air volume, and the button on the right is the adjustable mode.
4. The automobile air conditioning refrigeration system is mainly composed of compressor, evaporator, condenser, drying bottle, expansion valve, blower, control mechanism, etc. Compression process: The compressor sucks in the low-temperature and low-pressure refrigerant gas at the outlet of the evaporator and compresses it into high-temperature and high-pressure gas and discharges it into the compressor.
5. Automobile air conditioning refrigeration is to use refrigerant as the heat carrier for refrigeration and dehumidification through refrigeration circulation. The refrigeration cycle can be summarized into four processes: compression, heat dissipation, throttling and heat absorption.
6. Heat absorption process: The fog-like refrigerant liquid enters the evaporator, so the boiling point of the refrigerant is much lower than the temperature in the evaporator, so the refrigerant liquid evaporates into gas. During the evaporation process, the ambient heat is widely absorbed, and then the low-temperature and low-pressure refrigerant steam enters the compressor again.
How to minimize supply chain disruptions
author: 2024-12-23 10:56Pre-export HS code verification steps
author: 2024-12-23 10:39Germany export data by HS code
author: 2024-12-23 10:28Regional trade agreements HS code mapping
author: 2024-12-23 09:10Industry consolidation via HS code data
author: 2024-12-23 10:48Industry-focused market entry reports
author: 2024-12-23 10:45How to ensure trade compliance audits
author: 2024-12-23 09:56HS code monitoring in European supply chains
author: 2024-12-23 09:42Detailed trade data mapping tools
author: 2024-12-23 09:34451.62MB
Check626.23MB
Check159.29MB
Check214.73MB
Check153.19MB
Check914.91MB
Check432.42MB
Check438.57MB
Check839.28MB
Check955.33MB
Check435.44MB
Check422.62MB
Check173.38MB
Check595.85MB
Check786.82MB
Check976.71MB
Check444.59MB
Check614.53MB
Check776.57MB
Check684.56MB
Check622.96MB
Check137.51MB
Check891.65MB
Check248.45MB
Check663.44MB
Check482.98MB
Check911.95MB
Check175.72MB
Check218.16MB
Check863.44MB
Check972.37MB
Check688.53MB
Check538.96MB
Check341.17MB
Check464.62MB
Check599.77MB
CheckScan to install
Top import export compliance guides to discover more
Netizen comments More
2413 How to find emerging export markets
2024-12-23 10:57 recommend
1262 Global trade data warehousing solutions
2024-12-23 10:38 recommend
2454 Trade data integration with CRM
2024-12-23 10:36 recommend
2919 Ship parts HS code verification
2024-12-23 10:10 recommend
1222 Best platforms for international trade research
2024-12-23 08:41 recommend