1. Wuling Zhiguang Xiaoka is equipped with a 2L The four-cylinder naturally aspirated engine has a maximum power of 57 horsepower and a peak torque of 103 Nm. The engine adopts multi-point electric injection technology and meets the national V emission standards.
2. The Wuling Rongguang small car double-row 2 engine model should be LAQ. The engine adopts the latest in-line four-cylinder 16-valve, double overhead camshaft and plastic intake manifold and other technologies, with a lifting power of 52kW/L and a rated power of 63kW.
3. Wuling Glory 1.2 National five double-row small card engine model: LAQ, displacement (mL): 1206, air intake form: natural intake, cylinder arrangement form: L, number of cylinders (pieces): 4, number of valves per cylinder (pieces): 4, compression ratio: 9.8, gas distribution mechanism: DOHC.
1. Engine lack of cylinder, engine lack of cylinder mainly refers to one or more cylinders in the engine not working properly, which is manifested as: the exhaust gas flow discharged by the car has obvious intervals, and the exhaust pipe shakes heavily, which can obviously feel the shaking of the engine, sometimes accompanied by a sudden sound.
2. The common thing is that the throttle valve is dirty orIf the throttle valve fails, it will lead to idling jitter. The main reason why the throttle valve is dirty is that there is carbon accumulation at the junction of the shaft of the throttle valve plate and the throttle body, resulting in the opening of the throttle valve not being accurate enough, so the idle speed will shake.
3. I. Failure of the electronic control system, such as the sensor signal is missing or the signal is misalignified, the control signal is wrong or there is no signal output, the spark plug or ignition coil is damaged and the inability to ignite, the fuel injector does not inject oil and the line failure, etc.
4. The most common cause of car shaking is that the throttle valve is too dirty or the fuel injector has too much carbon.
5. Air intake system (1) Leakage of intake manifold or various valves When air, gasoline steam and combustion exhaust gas that should not enter enter the intake manifold, the mixture is too thick or too thin, causing the engine to burn abnormally.When the air leakage position only affects individual cylinders, the engine will shake more violently, which has a greater impact on the idling speed of the cold car.
1. The displacement and power are different. 2 stands for a 2-liter engine, while 5 stands for a 5-liter engine.Different displacements mean that the size and volume of the engine are different. The 5-liter engine has a larger volume and higher power.
2. Power and torque: Due to the difference in engine displacement, Wuling minivan 2 and 5 are also different in power and torque. The power and torque of the 5L engine are higher than those of the 2L engine, and the Wuling minivan 5 has better performance in terms of load and acceleration.
3. Engine displacement, fuel economy. Engine displacement: The engine displacement of Glory Card 2 is 2 liters, while the engine displacement of Glory Card 5 is 5 liters. Large displacement means greater power output capacity. Fuel economy: Engines with small displacement are better in terms of fuel economy.
4. The body specifications are different. The body specifications of the 2L model are 4390*1660*1750MM, and the wheelbase is 2720MM.THE BODY SPECIFICATION OF THE 5L MODEL IS 4420*1685*1770MM, AND THE WHEELBASE IS 2720MM.
5. Wuling Truck 2 and 5 displacements are the two displacement models of Wuling Glory. Their differences are: different maximum torque, different rated power, different compression ratio, different maximum torque. Wuling Truck 2: Maximum torque (Nm/rpm) 116/3600-4000.
How to track competitor import export data-APP, download it now, new users will receive a novice gift pack.
1. Wuling Zhiguang Xiaoka is equipped with a 2L The four-cylinder naturally aspirated engine has a maximum power of 57 horsepower and a peak torque of 103 Nm. The engine adopts multi-point electric injection technology and meets the national V emission standards.
2. The Wuling Rongguang small car double-row 2 engine model should be LAQ. The engine adopts the latest in-line four-cylinder 16-valve, double overhead camshaft and plastic intake manifold and other technologies, with a lifting power of 52kW/L and a rated power of 63kW.
3. Wuling Glory 1.2 National five double-row small card engine model: LAQ, displacement (mL): 1206, air intake form: natural intake, cylinder arrangement form: L, number of cylinders (pieces): 4, number of valves per cylinder (pieces): 4, compression ratio: 9.8, gas distribution mechanism: DOHC.
1. Engine lack of cylinder, engine lack of cylinder mainly refers to one or more cylinders in the engine not working properly, which is manifested as: the exhaust gas flow discharged by the car has obvious intervals, and the exhaust pipe shakes heavily, which can obviously feel the shaking of the engine, sometimes accompanied by a sudden sound.
2. The common thing is that the throttle valve is dirty orIf the throttle valve fails, it will lead to idling jitter. The main reason why the throttle valve is dirty is that there is carbon accumulation at the junction of the shaft of the throttle valve plate and the throttle body, resulting in the opening of the throttle valve not being accurate enough, so the idle speed will shake.
3. I. Failure of the electronic control system, such as the sensor signal is missing or the signal is misalignified, the control signal is wrong or there is no signal output, the spark plug or ignition coil is damaged and the inability to ignite, the fuel injector does not inject oil and the line failure, etc.
4. The most common cause of car shaking is that the throttle valve is too dirty or the fuel injector has too much carbon.
5. Air intake system (1) Leakage of intake manifold or various valves When air, gasoline steam and combustion exhaust gas that should not enter enter the intake manifold, the mixture is too thick or too thin, causing the engine to burn abnormally.When the air leakage position only affects individual cylinders, the engine will shake more violently, which has a greater impact on the idling speed of the cold car.
1. The displacement and power are different. 2 stands for a 2-liter engine, while 5 stands for a 5-liter engine.Different displacements mean that the size and volume of the engine are different. The 5-liter engine has a larger volume and higher power.
2. Power and torque: Due to the difference in engine displacement, Wuling minivan 2 and 5 are also different in power and torque. The power and torque of the 5L engine are higher than those of the 2L engine, and the Wuling minivan 5 has better performance in terms of load and acceleration.
3. Engine displacement, fuel economy. Engine displacement: The engine displacement of Glory Card 2 is 2 liters, while the engine displacement of Glory Card 5 is 5 liters. Large displacement means greater power output capacity. Fuel economy: Engines with small displacement are better in terms of fuel economy.
4. The body specifications are different. The body specifications of the 2L model are 4390*1660*1750MM, and the wheelbase is 2720MM.THE BODY SPECIFICATION OF THE 5L MODEL IS 4420*1685*1770MM, AND THE WHEELBASE IS 2720MM.
5. Wuling Truck 2 and 5 displacements are the two displacement models of Wuling Glory. Their differences are: different maximum torque, different rated power, different compression ratio, different maximum torque. Wuling Truck 2: Maximum torque (Nm/rpm) 116/3600-4000.
How to access global trade archives
author: 2024-12-23 07:04How to find HS code data for specific countries
author: 2024-12-23 06:53Shipping lane performance metrics
author: 2024-12-23 06:04Trade flow analysis by HS code category
author: 2024-12-23 05:58Commodity-specific import licensing data
author: 2024-12-23 05:37Refined sugar HS code identification
author: 2024-12-23 07:03HS code integration into supplier scorecards
author: 2024-12-23 05:24Trade data solutions for freight forwarders
author: 2024-12-23 05:18How to integrate HS codes into BOMs
author: 2024-12-23 05:08How to align trade data with demand planning
author: 2024-12-23 04:51348.58MB
Check478.12MB
Check958.57MB
Check713.94MB
Check914.73MB
Check628.48MB
Check529.17MB
Check136.89MB
Check971.89MB
Check677.78MB
Check571.21MB
Check153.34MB
Check579.66MB
Check636.97MB
Check318.68MB
Check474.91MB
Check252.43MB
Check198.95MB
Check537.79MB
Check761.96MB
Check257.91MB
Check654.36MB
Check166.59MB
Check175.65MB
Check587.15MB
Check389.31MB
Check963.79MB
Check536.22MB
Check488.59MB
Check232.21MB
Check412.16MB
Check953.38MB
Check916.72MB
Check486.66MB
Check859.94MB
Check616.95MB
CheckScan to install
How to track competitor import export data to discover more
Netizen comments More
885 HS code directory for imports
2024-12-23 05:58 recommend
518 Predictive container utilization analytics
2024-12-23 05:31 recommend
1093 Benchmarking competitors’ trade volumes
2024-12-23 05:01 recommend
1982 Industry-wise trade data breakdowns
2024-12-23 04:33 recommend
98 Global trade finance benchmarking
2024-12-23 04:29 recommend