1. System Composition The monitoring front-end is mainly composed of the former GloVIEW network video server, camera (protective cover, camera, lens, bracket), gimbal, decoder and other major equipment.
2. In the wireless monitoring system, the image system generally adopts the one-on-one working method or the point-to-point working method, that is, one transmitter corresponds to one microwave receiver, 10 monitoring points require 10 microwave transmitters, and 10 microwave receivers are needed at the receiving end. This is mainly determined by the display of the system image.
3. The system is advanced and reliable, and the cost is reasonable; it adopts the industry's advanced digital monitoring system, and the main equipment and software are mature imported products. According to the specific characteristics of the factory area, there are many trees, many small animals, etc.; it adopts a Japanese perimeter alarm detector with good anti-misalarm effect, which has strong anti-interference and low false positive rate.
2. OK. Installing cameras in the workshop does not violate the labor law and does not violate the privacy of employees.Enterprises install and use monitoring systems in the region within the scope of normal work.
3. Legal analysis: When installing monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
4. It is not illegal for the company to install cameras in the production line to monitor employees' work. To install monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
days, no matter how many cameras, before the automatic cover after 30 days, the current domestic technology is like this, and so is the public security bureau.
The canteen in the factory can still be monitored after a day, which is safe. The factory belongs to the general unit, and its installation and monitoring requirements for storage time are generally between 15 and 30 days. The one you said can be found within three days.
Different factories are different, 3 months at most and 10 days at least. It's very simple. If it is stolen but has not caught the "thief" for 10 days, the chance behind will be very small. In general, companies, factories and surveillance videos are generally kept for at least 10 days.
Generally, the monitoring content of factory cameras is determined by the size of the hard disk and the configuration of the saved video. The high-definition camera should need about 500M of space for an hour, that is, it only needs about 360G for a month. So it can be used for more than a year.
It depends on the size and settings of the hard disk.If it is included in the local sky network system, it is generally half a month to a month. But in fact, most of them are stored for more than 7 to 15 days due to the hard disk.
Under normal circumstances, a camera records continuously for 24 hours, which requires a hard disk capacity of about 0.3G-0.5G. Due to the limitation of storage space and storage cost, and the fact that the video recording in public places such as communities is multi-camera, the video will generally be automatically deleted about once a week.
Global trade scenario planning-APP, download it now, new users will receive a novice gift pack.
1. System Composition The monitoring front-end is mainly composed of the former GloVIEW network video server, camera (protective cover, camera, lens, bracket), gimbal, decoder and other major equipment.
2. In the wireless monitoring system, the image system generally adopts the one-on-one working method or the point-to-point working method, that is, one transmitter corresponds to one microwave receiver, 10 monitoring points require 10 microwave transmitters, and 10 microwave receivers are needed at the receiving end. This is mainly determined by the display of the system image.
3. The system is advanced and reliable, and the cost is reasonable; it adopts the industry's advanced digital monitoring system, and the main equipment and software are mature imported products. According to the specific characteristics of the factory area, there are many trees, many small animals, etc.; it adopts a Japanese perimeter alarm detector with good anti-misalarm effect, which has strong anti-interference and low false positive rate.
2. OK. Installing cameras in the workshop does not violate the labor law and does not violate the privacy of employees.Enterprises install and use monitoring systems in the region within the scope of normal work.
3. Legal analysis: When installing monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
4. It is not illegal for the company to install cameras in the production line to monitor employees' work. To install monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
days, no matter how many cameras, before the automatic cover after 30 days, the current domestic technology is like this, and so is the public security bureau.
The canteen in the factory can still be monitored after a day, which is safe. The factory belongs to the general unit, and its installation and monitoring requirements for storage time are generally between 15 and 30 days. The one you said can be found within three days.
Different factories are different, 3 months at most and 10 days at least. It's very simple. If it is stolen but has not caught the "thief" for 10 days, the chance behind will be very small. In general, companies, factories and surveillance videos are generally kept for at least 10 days.
Generally, the monitoring content of factory cameras is determined by the size of the hard disk and the configuration of the saved video. The high-definition camera should need about 500M of space for an hour, that is, it only needs about 360G for a month. So it can be used for more than a year.
It depends on the size and settings of the hard disk.If it is included in the local sky network system, it is generally half a month to a month. But in fact, most of them are stored for more than 7 to 15 days due to the hard disk.
Under normal circumstances, a camera records continuously for 24 hours, which requires a hard disk capacity of about 0.3G-0.5G. Due to the limitation of storage space and storage cost, and the fact that the video recording in public places such as communities is multi-camera, the video will generally be automatically deleted about once a week.
Global trade index visualization
author: 2024-12-23 11:30Enhanced shipment documentation verification
author: 2024-12-23 10:34HS code alignment for halal imports
author: 2024-12-23 09:28Fish and seafood HS code mapping
author: 2024-12-23 11:29Industry-specific HS code database
author: 2024-12-23 11:17Customized market entry reports
author: 2024-12-23 10:41HS code referencing for port authorities
author: 2024-12-23 10:40Comparative supplier performance data
author: 2024-12-23 10:35827.44MB
Check963.39MB
Check519.48MB
Check141.93MB
Check949.28MB
Check679.89MB
Check991.49MB
Check143.61MB
Check863.72MB
Check837.46MB
Check814.95MB
Check772.47MB
Check977.46MB
Check217.27MB
Check358.37MB
Check264.57MB
Check829.41MB
Check831.52MB
Check632.47MB
Check437.31MB
Check517.56MB
Check798.99MB
Check551.42MB
Check766.56MB
Check985.34MB
Check692.42MB
Check627.43MB
Check687.26MB
Check794.54MB
Check528.89MB
Check158.81MB
Check448.79MB
Check715.52MB
Check736.64MB
Check447.82MB
Check158.62MB
CheckScan to install
Global trade scenario planning to discover more
Netizen comments More
2508 Real-time cargo utilization metrics
2024-12-23 10:54 recommend
2964 Non-GMO products HS code classification
2024-12-23 10:35 recommend
2316 How to scale export operations with data
2024-12-23 10:27 recommend
1798 Identifying growth markets via HS code data
2024-12-23 10:11 recommend
755 Precious metals HS code alignment
2024-12-23 09:14 recommend