1. Solution steps: enter the system with PE. Display the hidden partition. Open the software Diskgenius, right-click on the hidden partition - cancel the hidden partition, add the drive letter - submit. Display hidden files.
2. There are several reasons for the infinite restart of ASUS notebook after reinstalling the system: Memory: Memory problems usually cause the computer to have a black screen, flower screen, computer freeze and other phenomena. The specific solution depends on the situation. Generally, it is to pull out the memory and re-plug it, try again and restart the calculation. The machine will see if it can be repaired.
3Judging from the description of the problem, it should be a system problem. It is recommended to send the whole computer to the official after-sales service center of ASUS for comprehensive inspection by professional maintenance engineers to confirm the fault and necessary maintenance.
1, causing insufficient power supply, or leakage in the electrolytic capacitor at the output end, which will cause insufficient power supply when starting up, resulting in automatic restart of the computer, processing Method: Repair the host power supply or replace the power supply.
2. Use the system repair tool: In Windows 10, you can use the system repair tool to repair damaged system files. You can choose from the Windows 10 boot menu.Select "Troubleshooting", "Advanced Options" and "Command Prompt", and then enter the sfc /scannow command to start the system file check and repair tool.
3. Make sure that the hardware equipment of the computer is stablely connected, including memory, hard disk, graphics card, etc. All devices have been connected stably. You can plug and unplug the device again and restart the computer. When the computer starts, press the F8 key to enter the safe mode. In safe mode, disable unnecessary startup items and restart the computer.
The reason why the computer reinstall system has been restarting is that in the process of reinstalling the system with a USB flash drive, the main boot record (MBR) of the hard disk is destroyed, resulting in the inability to boot the system and repeated restarts.Due to the different hard disk mode, the system cannot be booted, resulting in repeated restarts.
It may be a problem with the setting of the BIOS. Enter the BIOS to restore the default settings or take out the battery of the motherboard and wait 5 minutes before installing it. Purpose: It is to restore the default value of BIOS settings and eliminate the phenomenon of automatic restart or shutdown of the heat dissipation preset of BIOS.
It is likely that the master boot record (MBR) of the hard disk is destroyed in the process of reinstalling the system with a USB flash drive, resulting in the inability to boot the system and repeated restarts.
What are the reasons for the automatic restart of the computer? How to prevent and control? In terms of software, the virus will also prompt the system to start automatically after 60 seconds when the shock wave virus attacks. The Trojan horse program remotely controls all the activities of your computer, including restarting your computer.Solution: Remove viruses, Trojan horses, or reinstall the system.
If the computer keeps restarting after restoring the factory settings, or cannot enter the safe mode by pressing the F8 key, here are some possible solutions: Check the startup order: enter the BIOS setting interface of the computer (usually press Del, FF12 and other keys to enter) and confirm the startup order. The order setting is correct.
Solving ideas: This problem occurs because the computer has its own genuine system, and there is a hidden partition on the computer's hard disk to save the system backup. When we activate Windows with the activation tool, the activation tool will write the "bootmgr" file in the system disk and hidden partition.
After restarting the computer, it can be used normally. My solution: Then enter the password interface and click the third icon in the lower right corner, select the high contrast, and then enter the password to enter the win10 system desktop.
In the process of installing the official version of Win10, when there is a blue screen and an infinite restart failure, we first need to disable the "graphics card driver".When the computer restarts indefinitely, press and hold the power button to force the shutdown, and then turn it on again to automatically enter the repair state.
Press the "F10" key and press the Enter key to confirm and save the BIOS configuration. Finally, you need to restart the computer.
Turn off the power first, then open the host box, unplug the power cable and data cable of the hard disk, and then plug it in after 2 minutes. Restart it and try to repair the operating system. Keep clicking the F8 key to enter the system operation menu. If it is Win8, Win81, Win10 system, Press the power button for a long time after seeing the power-on screen.
There may be a problem with the system installation. You can replace the system to install the USB flash drive and try to reinstall the system.
Set it to "Enabled". Click F10 to save the settings, restart the system, and click ESC to select the startup item when starting up. Then you can install the win7 system smoothly with a compatible system disk. In addition: Reinstall the system. It is okay to use a USB flash drive or a hard disk, and the installation speed is very fast.
Hello! 1. The boot item of ESC can be selected. Generally, choose the USB disk startup item that does not start with UEFI; 2. BIOS, press F2 to enter BIOS-BOOT item-option #1 to select the first boot item. 3. If it still doesn't work, please tell the specific model of the machine to help you check whether other BIOS settings are needed.
There are several reasons for the infinite restart of the ASUS notebook after reinstalling the system: Memory: Memory problems usually cause the computer to have a black screen, flower screen, computer freeze and other phenomena. The specific solution depends on the situation. Generally, it is to pull out the memory and re-plug it, try again and restart the computer to see if it can be repaired. Repeat.
global trade management-APP, download it now, new users will receive a novice gift pack.
1. Solution steps: enter the system with PE. Display the hidden partition. Open the software Diskgenius, right-click on the hidden partition - cancel the hidden partition, add the drive letter - submit. Display hidden files.
2. There are several reasons for the infinite restart of ASUS notebook after reinstalling the system: Memory: Memory problems usually cause the computer to have a black screen, flower screen, computer freeze and other phenomena. The specific solution depends on the situation. Generally, it is to pull out the memory and re-plug it, try again and restart the calculation. The machine will see if it can be repaired.
3Judging from the description of the problem, it should be a system problem. It is recommended to send the whole computer to the official after-sales service center of ASUS for comprehensive inspection by professional maintenance engineers to confirm the fault and necessary maintenance.
1, causing insufficient power supply, or leakage in the electrolytic capacitor at the output end, which will cause insufficient power supply when starting up, resulting in automatic restart of the computer, processing Method: Repair the host power supply or replace the power supply.
2. Use the system repair tool: In Windows 10, you can use the system repair tool to repair damaged system files. You can choose from the Windows 10 boot menu.Select "Troubleshooting", "Advanced Options" and "Command Prompt", and then enter the sfc /scannow command to start the system file check and repair tool.
3. Make sure that the hardware equipment of the computer is stablely connected, including memory, hard disk, graphics card, etc. All devices have been connected stably. You can plug and unplug the device again and restart the computer. When the computer starts, press the F8 key to enter the safe mode. In safe mode, disable unnecessary startup items and restart the computer.
The reason why the computer reinstall system has been restarting is that in the process of reinstalling the system with a USB flash drive, the main boot record (MBR) of the hard disk is destroyed, resulting in the inability to boot the system and repeated restarts.Due to the different hard disk mode, the system cannot be booted, resulting in repeated restarts.
It may be a problem with the setting of the BIOS. Enter the BIOS to restore the default settings or take out the battery of the motherboard and wait 5 minutes before installing it. Purpose: It is to restore the default value of BIOS settings and eliminate the phenomenon of automatic restart or shutdown of the heat dissipation preset of BIOS.
It is likely that the master boot record (MBR) of the hard disk is destroyed in the process of reinstalling the system with a USB flash drive, resulting in the inability to boot the system and repeated restarts.
What are the reasons for the automatic restart of the computer? How to prevent and control? In terms of software, the virus will also prompt the system to start automatically after 60 seconds when the shock wave virus attacks. The Trojan horse program remotely controls all the activities of your computer, including restarting your computer.Solution: Remove viruses, Trojan horses, or reinstall the system.
If the computer keeps restarting after restoring the factory settings, or cannot enter the safe mode by pressing the F8 key, here are some possible solutions: Check the startup order: enter the BIOS setting interface of the computer (usually press Del, FF12 and other keys to enter) and confirm the startup order. The order setting is correct.
Solving ideas: This problem occurs because the computer has its own genuine system, and there is a hidden partition on the computer's hard disk to save the system backup. When we activate Windows with the activation tool, the activation tool will write the "bootmgr" file in the system disk and hidden partition.
After restarting the computer, it can be used normally. My solution: Then enter the password interface and click the third icon in the lower right corner, select the high contrast, and then enter the password to enter the win10 system desktop.
In the process of installing the official version of Win10, when there is a blue screen and an infinite restart failure, we first need to disable the "graphics card driver".When the computer restarts indefinitely, press and hold the power button to force the shutdown, and then turn it on again to automatically enter the repair state.
Press the "F10" key and press the Enter key to confirm and save the BIOS configuration. Finally, you need to restart the computer.
Turn off the power first, then open the host box, unplug the power cable and data cable of the hard disk, and then plug it in after 2 minutes. Restart it and try to repair the operating system. Keep clicking the F8 key to enter the system operation menu. If it is Win8, Win81, Win10 system, Press the power button for a long time after seeing the power-on screen.
There may be a problem with the system installation. You can replace the system to install the USB flash drive and try to reinstall the system.
Set it to "Enabled". Click F10 to save the settings, restart the system, and click ESC to select the startup item when starting up. Then you can install the win7 system smoothly with a compatible system disk. In addition: Reinstall the system. It is okay to use a USB flash drive or a hard disk, and the installation speed is very fast.
Hello! 1. The boot item of ESC can be selected. Generally, choose the USB disk startup item that does not start with UEFI; 2. BIOS, press F2 to enter BIOS-BOOT item-option #1 to select the first boot item. 3. If it still doesn't work, please tell the specific model of the machine to help you check whether other BIOS settings are needed.
There are several reasons for the infinite restart of the ASUS notebook after reinstalling the system: Memory: Memory problems usually cause the computer to have a black screen, flower screen, computer freeze and other phenomena. The specific solution depends on the situation. Generally, it is to pull out the memory and re-plug it, try again and restart the computer to see if it can be repaired. Repeat.
Europe import export statistics
author: 2024-12-23 07:12HS code-facilitated PL selection
author: 2024-12-23 07:02High-value electronics HS code checks
author: 2024-12-23 06:27Meat and poultry HS code references
author: 2024-12-23 06:06Germany international trade insights
author: 2024-12-23 05:38Supply chain disruption tracking
author: 2024-12-23 07:54Industrial chemicals HS code monitoring
author: 2024-12-23 07:51Global trade corridor analysis
author: 2024-12-23 07:21Precision instruments HS code verification
author: 2024-12-23 06:16Industrial spare parts HS code mapping
author: 2024-12-23 06:12294.89MB
Check259.17MB
Check144.13MB
Check485.91MB
Check213.67MB
Check482.78MB
Check278.51MB
Check813.42MB
Check921.54MB
Check379.46MB
Check151.13MB
Check867.78MB
Check167.46MB
Check653.66MB
Check519.34MB
Check517.58MB
Check929.16MB
Check471.78MB
Check766.41MB
Check496.71MB
Check336.76MB
Check784.13MB
Check343.83MB
Check537.76MB
Check637.86MB
Check141.47MB
Check549.94MB
Check279.18MB
Check664.68MB
Check442.38MB
Check876.95MB
Check253.99MB
Check488.77MB
Check897.84MB
Check122.94MB
Check945.19MB
CheckScan to install
global trade management to discover more
Netizen comments More
1500 Global trade agreement analysis
2024-12-23 07:54 recommend
724 Trade data-based price benchmarks
2024-12-23 07:45 recommend
859 Top-rated trade data platforms
2024-12-23 07:14 recommend
2312 How to analyze global export trends
2024-12-23 07:05 recommend
2220 shipment data access
2024-12-23 05:21 recommend