HS code-based FTA utilization

Engine jitter shutdown: Coping methods and HS code-based FTA utilizationprecautions In the process of driving a car, occasionally the engine shakes and causes the engine to shut down. This will not only affect our driving safety, but also cause unnecessary damage to the vehicle. So, how should we deal with this situation? This article will introduce some effective methods and precautions based on practical experience. I. Coping methods 1. To confirm the cause of the failure, first of all, we need to confirm the specific cause of the engine shaking and the degree of shutdown. If there is only a slight jitter and the vehicle does not turn off completely, it may be because the vehicle is not fully refueled or the air filter is blocked.At this time, we just need to add enough oil or replace the filter in time. If the engine is turned off because the vehicle is parked for too long, we just need to restart the vehicle and add a little throttle to keep the engine running. However, if the vehicle has not been able to start, it is likely that the vehicle's battery is out of power. At this time, the starter needs to be used to assist in starting the engine. Two. Pre-collision inspection Before driving, especially for long-distance driving, we need to check the condition of the whole car, including the engine, transmission, brakes and tires, etc., to ensure that the vehicle can run smoothly. If we find that the vehicle is unstable during the start-up process, we can stop the vehicle first to check whether the fuel is sufficient, and then try to start the engine. 3. Use oil correctlyIn the process of driving, you must constantly observe the operation of the engine, follow the throttle rules, and do not accelerate excessively or step on the accelerator. If you find that the engine is shaking, you can slow down appropriately, and then step on the accelerator gently to keep the engine running stably. Four. Timely maintenance. In addition, we also need to maintain the car in time. Regular replacement of oil, filters, spark plugs and other parts can effectively extend the service life of the car and avoid the shutdown caused by engine shaking. II. Precautions 1. Pay attention to driving safety. When dealing with engine shaking, we must pay attention to driving safety. If the vehicle has been turned off, you need to drive it to a safe parking place as soon as possible and wait for the troubleshooting before driving. In addition, when repairing and maintaining cars, you should also pay attention to road traffic safety and never affect the driving safety of other drivers.Two. Do not force acceleration. When you find that the car engine is shaking, do not accelerate excessively or step on the accelerator, which will increase the burden on the engine and lead to a greater risk of vehicle shutdown. 3. Do not park on the highway. If the car shakes and the engine goes out, do not stop on the highway at will, which will seriously affect road traffic safety. You can move the vehicle safely to the shoulder first, and then contact the road rescue or call the relevant alarm number to wait for the rescuers to deal with it. Four. Reduce sudden braking and sharp turns. In the process of driving, we also need to pay attention to reducing dangerous behaviors such as sudden braking and sharp turns, which will increase the load on the vehicle engine and increase the risk of shaking or shutdown of the vehicle. In a word, engine shaking caused by shutdown is a common car failure, but we can reduce the risk of failure through the above coping methods and precautions.Don't take chances, be responsible for road traffic safety, and abide by traffic rules, so as to drive safely.

Contact Us
Phone：020-83484676